S2L 3.50/40/180F 3.5SN OR BX
Product image
S2L 3.50/40/180F 3.5SN OR BX
Product image
S2L 3.50/40/180F 3.5SN OR BX
Dimensional drawing

S2L 3.50/40/180F 3.5SN OR BX

PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 40, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box

Tuotteen tunnus 2559330000
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 3 Samankaltaiset tuotteet 42
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform  

General ordering data

Version
PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 40, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box  
Order No.
2559330000  
Type
S2L 3.50/40/180F 3.5SN OR BX  
GTIN (EAN)
4050118894622  
Qty.
24  items
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A  
Packaging
Box  

Dimensions and weights

Depth
10,5  mm
Depth (inches)
0,413  inch
Height
17,7  mm
Height (inches)
0,697  inch
Height of lowest version
14,2  mm
Width
77  mm
Width (inches)
3,031  inch
Net weight
10,54  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System specifications

Product family
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row  
Type of connection
Board connection  
Mounting onto the PCB
THT solder connection  
Pitch in mm (P)
3,5  mm
Pitch in inches (P)
0,138  "
Outgoing elbow
180°  
Number of poles
40  
Number of solder pins per pole
1  
Solder pin length (l)
3,5  mm
Solder pin dimensions
d = 1.0 mm  
Octagonal  
Solder eyelet hole diameter (D)
1,3  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
L1 in mm
66,5  mm
L1 in inches
2,62  "
Pin series quantity
2  
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged  
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged  
Can be coded
Yes  
Plugging force/pole, max.
5  N
Pulling force/pole, max.
4  N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Material data

Insulating material
PBT  
Colour
orange  
Colour chart (similar)
RAL 2000  
Insulating material group
IIIa  
Comparative Tracking Index (CTI)
≥ 200  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Contact surface
tinned  
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy  
Storage temperature, min.
−40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
−50  °C
Operating temperature, max.
100  °C
Temperature range, installation, min.
−30  °C
Temperature range, installation, max.
100  °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
10  A
Rated current, max. number of poles (Tu=20°C)
10  A
Rated current, min. number of poles (Tu=40°C)
9  A
Rated current, max. number of poles (Tu=40°C)
8,5  A
Rated voltage for surge voltage class / pollution degree II/2
250  V
Rated voltage for surge voltage class / pollution degree III/2
125  V
Rated voltage for surge voltage class / pollution degree III/3
80  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5  kV
Short-time withstand current resistance
3 x 1s with 77 A  

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150  V
Rated current (Use group B / CSA)
5  A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
150  V
Rated current (Use group B / UL 1059)
10  A

Packing

Packaging
Box  
VPE length
338  mm
VPE width
130  mm
VPE height
27  mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002637  
ETIM 7.0
EC002637  
ETIM 8.0
EC002637  
ETIM 9.0
EC002637  
ETIM 10.0
EC002637  
ECLASS 9.0
27-44-04-02  
ECLASS 9.1
27-44-04-02  
ECLASS 10.0
27-44-04-02  
ECLASS 11.0
27-46-02-01  
ECLASS 12.0
27-46-02-01  
ECLASS 13.0
27-46-02-01  
ECLASS 14.0
27-46-02-01  
ECLASS 15.0
27-46-02-01