ACT20M-FRQ-AO-X-S
Product image
ACT20M-FRQ-AO-X-S
Connection diagram
ACT20M-FRQ-AO-X-S
Dimensioned drawing

ACT20M-FRQ-AO-X-S

Frequency signal converter, exclusive of rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V

Ürün No. 2825130000
Product not yet available, preliminary product data.
Veri sayfasını indir Engineering Support Software Support Product Downloads
Aksesuarlar 2 İlgili ürünler 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Connection data EMC conformity and approvals Classifications

Approvals

ROHS
Conform  

General ordering data

Version
Frequency signal converter, exclusive of rail bus supply, Input : Frequency, Output : 0(4)-20 mA, 0(2)-10 V  
Order No.
2825130000  
Type
ACT20M-FRQ-AO-X-S  
GTIN (EAN)
4064675360940  
Qty.
1  adet

Dimensions and weights

Depth
114,3  mm
Depth (inches)
4,5  inch
Height
112,5  mm
Height (inches)
4,429  inch
Width
6,1  mm
Width (inches)
0,24  inch
Net weight
70  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-25 °C...70 °C  
Humidity
0...95 % (no condensation)  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924  

Input

Input frequency
0…100kHz  
Number inputs
1  
Sensor
NAMUR sensor, according to EN60947-5-6  
NPN / PNP transistor (trig-level low: ≤4 V high: ≥7 V )  
TTL (trig-level low: ≤0.8 V high: ≥2.0 V)  
Tacho (trig-level low: ≤-50 mV high: ≥+50 mV)  
Special current (trig-level: user-defined)  
Special voltage (trig-level: user-defined)  
S0 (trig-level low: ≤2.2 mA high: ≥9.0 mA )  
Sensor supply
5…17 V  

Output

Load impedance current
≤ 600 Ω  
load impedance voltage
≥ 10 kΩ  
Number of outputs
1  
Output current
0...20 mA  
4...20 mA  
in case of sensor error  
downscale (3,5 mA)  
upscale (23 mA)  
Output signal limit
<28 mA  
Output voltage, note
0(2)...10 V  
0(1)...5 V  
0(0,2)…1 V  
Type
active  
connected control must be passive  

General data

Accuracy
Basic accuracy: 0.0002 Hz  
Configuration
DIP switch  
With FDT/DTM software  
Mounting rail
TS 35  
Nominal power consumption
0,5  VA
Operating altitude
≤ 2000 m  
Power consumption, max.
1,2  W
Power consumption, typ.
0,65  W
Protection degree
IP20  
Step response time
≤ 30 ms  
(0…90% / 100…10% of input level)  
Supply voltage
24 V DC ± 30 %  
Temperature coefficient
≤0,01% of measurement range⁄°C  

Insulation coordination

EMC standards
IEC 61326-1  
Galvanic isolation
3-way isolator  
Insulation voltage
2.5 kVeff /1 min.  
Pollution severity
2  
Rated voltage
300 Veff  
300 V  
Surge voltage category
II  

Connection data

Type of connection
Screw connection  
Tightening torque, min.
0,4  Nm
Tightening torque, max.
0,6  Nm
Clamping range, rated connection
2,5  mm²
Clamping range, min.
0,5  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 30  
Wire connection cross section AWG, max.
AWG 14  

EMC conformity and approvals

EMC standards
IEC 61326-1  

Classifications

ETIM 6.0
EC002918  
ETIM 7.0
EC002918  
ETIM 8.0
EC002918  
ETIM 9.0
EC002918  
ETIM 10.0
EC002918  
ECLASS 9.0
27-21-01-28  
ECLASS 9.1
27-21-01-28  
ECLASS 10.0
27-21-01-28  
ECLASS 11.0
27-21-01-28  
ECLASS 12.0
27-21-01-28  
ECLASS 13.0
27-21-01-28  
ECLASS 14.0
27-21-01-28  
ECLASS 15.0
27-21-01-28