ACT20P-CI-VO-P-P
Product image
ACT20P-CI-VO-P-P
Connection diagram
ACT20P-CI-VO-P-P
Dimensioned drawing
ACT20P-CI-VO-P-P
Similar to illustration
ACT20P-CI-VO-P-P
ACT20P-CI-VO-P-P

ACT20P-CI-VO-P-P

Аналоговый разделительный усилитель, Вход : 0(4)-20 mA, Выход : 0-10 V, Подача питания также через реечную шину CH20M, Преобразователь сигнала с гальванической развязкой

Produkt ID 2514640000
Åbn i konfiguratoren
Download datablad Engineeringondersteuning Productdownloads
Tilbehør 2 Enkeltdele 1 Anvendte produkter 15
승인 Основные данные для заказа Wymiary i masa Temperatury 失效概率 Zgodność produktu z wymogami środowiska naturalnego Input Output Output (analogue) General data Insulation coordination Data for Ex applications (ATEX) Anslutningsdata Part description Classifications

승인

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/4a92d911-d582-40e3-85fc-c9e9b159e140/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fb608f0-c73d-4515-a7a5-878046a505f4/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/52b59257-358c-4bc4-9ea4-df407cebf157/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E469563 
Certificate no. (cULusEX)
E338066 

Основные данные для заказа

Version
Аналоговый разделительный усилитель, Вход : 0(4)-20 mA, Выход : 0-10 V, Подача питания также через реечную шину CH20M, Преобразователь сигнала с гальванической развязкой 
Order No.
2514640000 
Type
ACT20P-CI-VO-P-P 
GTIN (EAN)
4050118535211 
Qty.
1 Styk

Wymiary i masa

Depth
113,7 mm
Глубина (дюймов)
4,476 inch
Height
127,1 mm
Height (inches)
5,004 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
140 g

Temperatury

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

失效概率

SIL in compliance with IEC 61508
None 

Zgodność produktu z wymogami środowiska naturalnego

RoHS Compliance Status
Zgodne, z wyłączeniem 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
0...20 mA 
4…20mA 
Number inputs
1 
Sensor
2-wire transmitter (without own power supply) 
3-wire sensor 
4- wire sensor (with own power supply) 
Sensor supply
> 17 V DC at 20 mA 
Voltage drop
≤ 1 V 

Output

Load impedance current
≤ 550 Ω 
load impedance voltage
≥ 600 kΩ 
Number of outputs
1 
Output voltage, note
0…10 V (if input: 0…20 mA) 
2…10 V (if input: 4…20 mA) 
Type
active 
connected control must be passive 

Output (analogue)

Number analogue outputs
1 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Current consumption
≤60 mA (24V power supply, 20mA output) 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 0,5 ms 
Supply voltage
20…30 V DC 
Temperature coefficient
80 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
3-way isolator 
between input ⁄ output ⁄ supply 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
2 kV inputs / outputs / power supply 
Pollution severity
2 
Surge voltage category
III 
Test voltage
0,3 kV

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T5 Gc 
Marking
II 3 G Ex ec IIC T5 Gc 

Anslutningsdata

PUSH IN 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The fixed DC repeater ACT20P-CI-VO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linear and galvanic isolated into an analogue output voltage signal. The power supply is galvanically isolated from input and output (3-way isolation).

Features
  • The active or passive mA current signal inputs are completely electrically isolated.
  • Front LED indicates operation status.
  • 3-way galvanic isolation between input, output and power supply
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20