ACT20P-UI-2RCO-AC-S
Product image
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
Dimensioned drawing
ACT20P-UI-2RCO-AC-S
Similar to illustration
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S
ACT20P-UI-2RCO-AC-S

ACT20P-UI-2RCO-AC-S

Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, 90…264 V AC power supply

Ürün No. 1238910000
Konfigüratörde aç
Veri sayfasını indir Mühendislik desteği Yazılım desteği Ürün İndirmleri
Aksesuarlar 3 Münferit parçalar 1 İlgili ürünler 17
Approvals General ordering data Dimensions and weights Temperaturas Probability of failure Conformidad medioambiental del producto Input Output Output (digital) General data Insulation coordination 결선 데이터 Part description Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/4a92d911-d582-40e3-85fc-c9e9b159e140/DAP_Master_ICON,w_80,q_80) 
Approvals
CULUS; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULusEX)
E338066 

General ordering data

Version
Limit value monitoring, Input : universal U, I, R,ϑ, Output : 2 x relays, 90…264 V AC power supply 
Order No.
1238910000 
Type
ACT20P-UI-2RCO-AC-S 
GTIN (EAN)
4050118027075 
Qty.
1 adet

Dimensions and weights

Depth
113,6 mm
Profondeur (pouces)
4,472 inch
Height
119,2 mm
Height (inches)
4,693 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
345,685 g

Temperaturas

Storage temperature
-20 °C...70 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
10…90 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 
MTBF
180 a

Conformidad medioambiental del producto

RoHS Compliance Status
Conforme con exención 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Cable-length compensation
<±0.002 Ω per cable resistance Ω 
Influence of the sensor cable resistance
5 Ω @ RTD- Kabel 
Input current
configurable 
± 25 mA DC 
±5 A DC 
Input resistance, current
40 Ω 
Input resistance, voltage
2 MΩ 
> 10 MΩ 
Input voltage
configurable 
±150 mV DC 
± 600mV DC 
±30 V DC 
±300 V DC 
Number inputs
1 
Potentiometer
1.2…500 kΩ 
Resistance
0…10 kΩ 
0…12 kΩ 
0…15 kΩ 
Sensor
RTD (2,3-wire): Pt100, Pt200, Pt1000, Ni120, Cu10 
Thermocouples: B, E, J, K, L, N, R, S, T,U 
Sensor supply
0.1 mA / 0.05 mA (depending on measuring range) @ RTD cable 
24 V (@ 4-20 mA loop) 
Temperature input range
B: +100…+1820 °C 
E: -270…+1000 °C 
J: (-210…+1200 °C) 
K: -270…+1372 °C 
L: +100…+900 °C 
N: (-180…+1300 °C) 
R: -50…+1768 °C 
S: -50…+1768 °C 
T: -270…+400 °C 
U: -200…+600 °C 

Output

Number of outputs
2 

Output (digital)

Alarm function
configurable 
Top and bottom limit values, window range 
Alarm delay: 0…99 s 
Hysteresis adjustable 
auto / manual reset 
Max. switching voltage, AC
250 V
Max. switching voltage, DC
110 V
Rated switching current
200mA @ 110Vdc 
6A @ 24Vdc / 240Vac 
Sorties digitales
2 
Type
2 CO contacts 
normal / inverse adjustment 
Switching frequency 20 Hz 

General data

Accuracy
<0.1 % of measuring range 
Cold-junction compensation error
±2.0°C @ -20° C - 70°C 
Configuration
With FDT/DTM software 
or via 7-segment display, push-buttons and rotary encoder on the device itself 
Requires configuration adapter 8978580000 CBX200 USB 
Long-term drift
0.1 % / 10.000 h 
Mounting rail
TS 35 
Nominal power consumption
1,5 VA
Operating altitude
≤ 2000 m 
Power consumption
≤ 3.5 W 
<2 W 
Protection degree
IP20 
Repeat accuracy
± 0.05 % of measuring range final value 
Step response time
450 ms 
Supply voltage
90…264 V AC 
Temperature coefficient
<0.02 °C of measuring range / °C 
350 ppm/K 

Insulation coordination

EMC standards
EN 61326-1 
Galvanic isolation
between input ⁄ output ⁄ supply ⁄ relay 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
4 kV (input / output) 
Pollution severity
2 
Rated voltage
300 Veff 
Surge voltage category
III 
Test voltage
0,3 kV

결선 데이터

Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Part description

Product description
The devices of the ACT20P-UI-2RCO-XX-x family record current, voltage, potentiometer and temperature sensor signals (mA, A, mV, V, potentiometer, RTD and TC). They have two independent relay outputs which emit an alarm when levels exceed or fall below pre-set limits.

Properties

  • Configuration and diagnosis with the FDT/DTM software “WI-Manager”.
  • Manual configuration on the device is performed via the LED display by means of operating buttons and rotary encoders.
  • The dual-channel trip amplifier enables various alarm functions: window alarm, alarm delay, wire break detection, hysteresis and upper / lower limit alarm.
  • The active or passive signal inputs for RTD, TC, potentiometer, voltage and current are fully galvanically isolated.
  • Remote diagnosis: reporting of errors (e.g. cable breaks) via status relay.
  • Operational status and relay status indicated by front panel LEDs.
  • Galvanic 4-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002654 
ETIM 9.0
EC002654 
ETIM 10.0
EC002654 
ECLASS 14.0
27-21-01-22 
ECLASS 15.0
27-21-01-22 

Tender specification sheets

Long specification

Módulo de control de valores límite universal con salida de relé y
alimentación externa
 Módulo de control de valores límite universal de 22,5 mm de ancho, con alimentación de tensión
y del sensor externa, para el control y la separación de corrientes DC +/- 25 mA a 5 A,
tensiones DC +/-600 mV a 300 V, sensores RTD de 2/3/4 conductores, resistencias, potenciómetros
y señales de termopares según IEC584.
En la salida dispone de dos contactos de relé (contactos conmutados).
El módulo se programa mediante el software FDT/DTM.

Carcasas para montaje sobre carril TS35
Dimensiones: largo/ancho/alto 119/ 22,5/ 113,6 mm
Conexión brida-tornillo/ sección nominal 2,5 mm2
Grado de protección: IP 20  

Entrada                         +/-25 mA - 5 A DC                                      
                                      +/- 600 mV - 300 V DC
                                      PT100, PT1000, Ni100, Ni1000
                                      Resistencia 0 - 12 kOhm
                                      Potenciómetro 0 - 500 kOhm
                                      Termopares tipo B, E, J, K, L, LR, N, R, S, T, U, W3, W5
Alimentación del sensor 24 V DC  
Salida                                             2 x 1 contactos conmutados (chapados en oro) 
                                      240 V AC/ 24 V DC @ 6 A
Precisión de repetición        < 0,05 % v. E.  
Tiempo de respuesta gradual
10 - 90 %                      < 200 ms
Energía auxiliar                                     90 a 264 V AC / 120 a 370 V DC
Pérdida de potencia aprox. 3 W @ 240 V AC
Rango de
temperatura ambiente -20 °C - +70 °C



Separación                                 EN 50178, separación segura de 3 vías de hasta 3 kV AC/DC entre todos los circuitos en sentido contrario
Tensión de trabajo                               3 kV entrada contra salida contra energía auxiliar
Tensión
nominal                                         300 V AC/DC en la categoría de sobretensión II y grado de polución 2

Homologaciones cULus




Tipo                                                             ACT20P-UI-2RCO-AC-S


 
Short specification
Universal limit-value monitoring component with relay output and
external supply
Universal limit-value monitoring component in 22.5 mm width with external voltage
and sensor supply for monitoring and isolating DC currents +/- 25mA...5 A,
DC- voltages +/-600 mV... 300 V, 2-/3-/-4-wire RTD sensors, resistors, potentiometers
and thermocouple signals, in compliance with IEC584.
Two relay contacts (CO) are available on the output side.
This component is programmed using FDT/DTM software.