ACT20X-HAI-SAO-S
Product image
ACT20X-HAI-SAO-S
Connection diagram
ACT20X-HAI-SAO-S
Application
ACT20X-HAI-SAO-S
Block diagram
ACT20X-HAI-SAO-S
ACT20X-HAI-SAO-S
ACT20X-HAI-SAO-S
Dimensioned drawing
ACT20X-HAI-SAO-S
Derating curve
Removable terminals with coding

ACT20X-HAI-SAO-S

EX signal isolating converter, HART®, 1-channel, Ex-input: 4 - 20 mA, Safe-output: 4-20mA

ID výrobku 8965430000
Otevřít v konfigurátoru
Stáhnout datový list Mühendislik desteği Yazılım desteği Ürün İndirmleri
Aksesuarlar 3 İlgili ürünler 4
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Assembling Input EX Output Output (Status) General specifications Insulation coordination Data for Ex applications (ATEX) Connection data Garantie Part description Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/2fb608f0-c73d-4515-a7a5-878046a505f4/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/cbf09862-97e9-475d-b71a-c6db1e3e9933/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33adcb9c-2865-4cbb-8057-1da77b87f940/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/c809b3ab-e765-499c-852e-d528779da9f7/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/52b59257-358c-4bc4-9ea4-df407cebf157/DAP_Master_ICON,w_80,q_80) 
Approvals
DNVGL; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Nr certyfikatu (cULus)
E337701 

General ordering data

Version
EX signal isolating converter, HART®, 1-channel, Ex-input: 4 - 20 mA, Safe-output: 4-20mA 
Order No.
8965430000 
Type
ACT20X-HAI-SAO-S 
GTIN (EAN)
4032248785049 
Qty.
1 adet

Dimensions and weights

Depth
113,6 mm
Depth (inches)
4,472 inch
Height
119,2 mm
Height (inches)
4,693 inch
Width
22,5 mm
Width (inches)
0,886 inch
Net weight
186 g

Temperatures

Storage temperature
-20 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity
0...95 % (no condensation) 

Probability of failure

SIL PAPER
[SIL certificate](PDF/Cert_Weidmueller_070902_P0002_C006_V2R1.pdf) 
SIL in compliance with IEC 61508
2 
MTBF
177 a
SFF
80 %

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Assembling

Mounting position
horizontal or vertical 
Mounting rail
TS 35 
Type of mounting
Snap mounting support rail 

Input EX

Alimentación del sensor
> 16 V DC 
Courant d'entrée
4…20mA 
Feszültségesés, táplált
<4.5 V 
Output signal in case of wire break
<1 mA 
Residual ripple (current loop)
<7.5 mVeff 
Type
obwód iskrobezpieczny 
aktywny (jako źródło prądowe) lub pasywny (jako dren) 
입력 수, Ex
1 
전압 강하 무전원
<6 V 

Output

Load impedance current
≤ 600 Ω 
Load stability
≤ 0.01 % of end value / 100 Ω 
Number of outputs
1 
Output current
4...20 mA 
Output signal limit
<28 mA 
Type
attivo (come corrente di source ) o passivo (come corrente di sink) 

Output (Status)

Alarm function
Device error 
Failure of power supply 
Activation relay within set range, between 3,8 - 20,5 mA 
Continuous current
≤ 0.5 A AC / 0.3 A DC (safe zone) 
≤ 0,5 A AC / 1 A DC (zone 2) 
Hysteresis
0,1 mA (kapcsolási küszöb) 
Nominal switching voltage
≤ 125 V AC / 110 V DC (safe area)
≤ 32 V AC / 32 V DC (zone 2) 
Number of alarm outputs
1 
Power rating
≤ 62.5 VA / 32 W (safe area)
≤ 16 VA / 32 W (Zone 2) 
Type
Relais d'état 
1 NC (sans tension) 

General specifications

IP20 
Accuracy
<0.1% span 
Configuration
With FDT/DTM software 
Requires configuration adapter 8978580000 CBX200 USB 
HART® transparency supported
Ja 
Heat dissipation
≤0,8 W 
Humidity
0...95 % (sans condensation) 
Operating altitude
≤ 2000 m 
Step response time
≤ 5 ms 
Supply voltage
19.2…31.2 V DC 
Temperature coefficient
< 0,01 % der Spanne/°C (TU) 
Type of connection
Skruvanslutning 
Type of signal forwarding according to HART®
unchanged 

Insulation coordination

EMC standards
EN 61326-1 
Insulation voltage
2.6 kV (input / output) 
Rated voltage
300 V 
Standards
EN 61010-1 
Surge voltage category
II 
Verschmutzungsgrad
2 

Data for Ex applications (ATEX)

ATEX - dust labelling
II (1) D [Ex ia Da] IIIC 
I (M1) [Ex ia Ma] I 
ATEX - gas labelling
II (1) G [Ex ia Ga] IIC/IIB/IIA 
IECEx - gas labelling
Ex nA nC IIC T4 Gc 
Ex ec nC IIC T4 Gc 
[Ex ia Ga] IIC/IIB/IIA 
Installation location
Dispositivo installato in area sicura, zona 2 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,25 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 12 

Garantie

Time interval
3 años 

Part description

Product description
The ACT20X-HAI-SAO-S current supply isolator is a HART-protocol, transparent isolator for analogue DC current signals from Ex-zone 0. The input may also operate as an active current loop (the loop current provided by the device). The device provides an 4...20 mA current signal for the safe zone on the output side. The device is available as single-channel or dual-channel version. 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20 

Tender specification sheets

Long specification

Ex supply isolator for standard DC current signals, 2-channel, HART transparent
2-channel supply isolator in 22.5 mm width with external power supply,
for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safe
zones. The component has an active and passive input. External sensors can be supplied with
> 15 VDC. The 4...20 mA output circuit can be operated either passively or actively.
Status and error messages are available via a relay contact (NO).

The component can be configured using standard FDT/DTM software.

Add-on housing for TS35 rail mounting
Dimensions: L/W/H 119.2/ 22.5/ 113.6
Screw connection/ Nominal cross-section 2.5 mm2
Protection degree: IP 20  

Input                           4...20 mA 
                                       > 15 V DC sensor supply                                     
Output 
  active                                                           4...20 mA
  passive 4...20 mA current loop max. 26 V DC
Load                              < 600 Ohm
Accuracy                     < 0,1 % v.E
Temperature coefficient     < 0,01% v.E./°C (Tu) 
Alarm output relay 1 NO contact 
                                       250 V AC / 30 V DC @ 2A safe zone
                                       32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2
Auxiliary power                                       19...31.2 V DC
Power loss approx. 1.8 W
Ambient
temperature range -20 °C...+60 °C

Secure isolation                   EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each other
Working voltage                     300 V AC/DC at overvoltage category II and pollution degree 2
Approvals cULus, ATEX IECEX, FM

ATEX marking II 3 G ExnA nC IIC T4
ATEX characteristic data U0 = 28 V DC
                                       I0  = 93 mA DC
                                       P0 = 650 mW

Type                                                              ACT20X-HAI-SAO-S

 
Short specification

Ex supply isolator for standard DC current signals, 2-channel, HART transparent2-channel supply isolator in 22.5 mm width with external power supply,for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safezones.


The component has an active and passive input. External sensors can be supplied with
>15 V DC. The 4...20 mA output circuit can be operated either passively or actively.
Status and error messages are available via a relay contact (NO).

The component can be configured using standard FDT/DTM software.