DRIKIT 115VAC 2CO LD
Product image
Similar to illustration
DRIKIT 115VAC 2CO LD
Wiring diagram
DRIKIT 115VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRIKIT 115VAC 2CO LD
Graph
Electrical service life
DRIKIT 115VAC 2CO LD
Graph
AC operational voltage range
DRIKIT 115VAC 2CO LD
Dimensional drawing
DRIKIT 115VAC 2CO LD
Miscellaneous
Type codes

DRIKIT 115VAC 2CO LD

D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 5 A, Screw connection, Test button available: No

Produkt ID 2476860000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 11 Enkeltdele 3 Anvendte produkter 14
Tanúsítványok Allmänna beställningsdata Dimensioni e pesi Температуры Экологическое соответствие изделия Strona sterownicza Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Tanúsítványok

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

Allmänna beställningsdata

Version
D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 5 A, Screw connection, Test button available: No 
Order No.
2476860000 
Type
DRIKIT 115VAC 2CO LD 
GTIN (EAN)
4050118497083 
Qty.
10 Styk

Dimensioni e pesi

Depth
67,7 mm
Depth (inches)
2,665 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
Width (inches)
0,622 inch
Net weight
64 g

Температуры

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Экологическое соответствие изделия

RoHS Compliance Status
Соответствует с исключением 
RoHS Exemption (if applicable/known)
7cI 
REACH SVHC
No SVHC above 0.1 wt% 

Strona sterownicza

Rated control voltage
115 В AC 
Rated current AC
9.3 mA 
Power rating
1.1 VA 
Coil resistance
6200 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,25 mm²
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Klingenmaß
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01