DRIKIT 230VAC 1CO LD/PB
Product image
Similar to illustration
DRIKIT 230VAC 1CO LD/PB
Wiring diagram
DRIKIT 230VAC 1CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKIT 230VAC 1CO LD/PB
Graph
Electrical service life
DRIKIT 230VAC 1CO LD/PB
Graph
AC operational voltage range
DRIKIT 230VAC 1CO LD/PB
Dimensional drawing
DRIKIT 230VAC 1CO LD/PB
Miscellaneous
Type codes

DRIKIT 230VAC 1CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 230 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes

Ürün No. 2476800000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 11 Münferit parçalar 3 İlgili ürünler 14
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 1, CO contact AgSnO, Rated control voltage: 230 V AC, Continuous current: 10 A, Screw connection, Test button available: Yes 
Order No.
2476800000 
Type
DRIKIT 230VAC 1CO LD/PB 
GTIN (EAN)
4050118497021 
Qty.
10 adet

Dimensions and weights

Depth
68 mm
Depth (inches)
2,677 inch
Height
80,2 mm
Height (inches)
3,157 inch
Width
15,8 mm
Largeur (pouces)
0,622 inch
Nettogewicht
59,1 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7cI 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
230 V AC 
Rated current AC
4,9 mA 
Potencia nominal
1.1 VA 
Coil resistance
23500 Ω ± 10 % 
Statusindikering
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
10 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC kapcsolási teljesítmény (ohmos), max.
2500 VA 
DC kapcsolási teljesítmény (ohmos), max.
240 W @ 24 V 
Einschaltverzögerung
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
1 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
UL94 가연성 등급 구성요소
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Groupe de matériaux isolants
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Spannungsfestigkeit Steuerseite - Lastseite
4 kVeff / 1 Min. 
Dielektrická pevnost otevřeného kontaktu
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Wire connection method
Screw connection 
Stripping length, rated connection
8 mm
Tightening torque, min.
0,5 Nm
Meghúzási nyomaték, max.
0,8 Nm
Rögzítési tartomány, névleges csatlakozás
1,5 mm²
Rögzítési tartomány, névleges csatlakozás, min.
0,25 mm²
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01