LMF 7.50/11/180 3.5SN OR BX
Product image
LMF 7.50/11/180 3.5SN OR BX
Product image
LMF 7.50/11/180 3.5SN OR BX
Dimensional drawing
LMF 7.50/11/180 3.5SN OR BX
Derating curve
LMF 7.50/11/180 3.5SN OR BX
Derating curve
LMF 7.50/11/180 3.5SN OR BX
Product benefits
High reliability of the current capacity
LMF 7.50/11/180 3.5SN OR BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMF 7.50/11/180 3.5SN OR BX
Product benefits
Maintenance through test point

LMF 7.50/11/180 3.5SN OR BX

Printed circuit board terminals, 7.50 mm, Number of poles: 11, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN with actuator, Box

Ürün No. 2774630000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 1 İlgili ürünler 22
General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications Approvals

General ordering data

Version
Printed circuit board terminals, 7.50 mm, Number of poles: 11, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN with actuator, Box  
Order No.
2774630000  
Type
LMF 7.50/11/180 3.5SN OR BX  
GTIN (EAN)
4064675039334  
Qty.
15  adet
Product data
IEC: 1000 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12  
Packaging
Box  

Dimensions and weights

Depth
14,8  mm
Depth (inches)
0,583  inch
Height
22,7  mm
Height (inches)
0,894  inch
Width
82,7  mm
Width (inches)
3,256  inch
Net weight
19,395  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE Signal - series LMF  
Wire connection method
PUSH IN with actuator  
Mounting onto the PCB
THT solder connection  
Conductor outlet direction
180°  
Pitch in mm (P)
7,5  mm
Pitch in inches (P)
0,295  "
Number of poles
11  
Pin series quantity
2  
Number of rows
1  
Solder pin length (l)
3,5  mm
Solder pin dimensions
0.6 x 0.8 mm  
Stripping length
10  mm
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch  

Material data

Insulating material
Wemid (PA)  
Colour
orange  
Colour chart (similar)
RAL 2000  
Comparative Tracking Index (CTI)
≥ 600  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Contact surface
tinned  
Coating
4-6 μm SN  
Layer structure of solder connection
4...8 µm Sn matt  
Storage temperature, min.
-40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
120  °C

Conductors suitable for connection

Wire connection cross section AWG, min.
AWG 24  
Wire connection cross section AWG, max.
AWG 12  
Solid, min. H05(07) V-U
0,5  mm²
Solid, max. H05(07) V-U
2,5  mm²
Flexible, min. H05(07) V-K
0,25  mm²
Flexible, max. H05(07) V-K
2,5  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5  mm²
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.  
The outside diameter of the plastic collar should not be larger than the pitch (P)  

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
24  A
Rated current, max. number of poles (Tu=20°C)
19  A
Rated current, min. number of poles (Tu=40°C)
21  A
Rated current, max. number of poles (Tu=40°C)
24  A
Rated voltage for surge voltage class / pollution degree II/2
1.000  V
Rated voltage for surge voltage class / pollution degree III/2
600  V
Rated voltage for surge voltage class / pollution degree III/3
500  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
6  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
6  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
6  kV
Short-time withstand current resistance
3 x 1s with 120 A  

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300  V
Rated voltage (Use group D / CSA)
300  V
Rated current (Use group B / CSA)
20  A
Rated current (Use group D / CSA)
10  A
Wire cross-section, AWG, min.
AWG 24  
Wire cross-section, AWG, max.
AWG 12  

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300  V
Rated voltage (Use group D / UL 1059)
300  V
Rated current (Use group B / UL 1059)
20  A
Rated current (Use group D / UL 1059)
10  A
Wire cross-section, AWG, min.
AWG 24  
Wire cross-section, AWG, max.
AWG 12  

Packing

Packaging
Box  
VPE length
338  mm
VPE width
130  mm
VPE height
27  mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, approval marking UL, approval marking CSA, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      flexible 4 mm²
    • Type of conductor and conductor cross-section:
      AWG 12/7
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0,9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 4 mm²
  • Evaluation:
    passed
Pull-out test
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥ 60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 4 mm²
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01  

Approvals

ROHS
Conform