LP 5.08/11/135 3.2SN OR BX
Product image
Similar to illustration
LP 5.08/11/135 3.2SN OR BX
Dimensional drawing
LP 5.08/11/135 3.2SN OR BX
Graph

LP 5.08/11/135 3.2SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 11, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box

Ürün No. 1843190000
Veri sayfasını indir Product Downloads Engineering Support
Aksesuarlar 6 İlgili ürünler 14
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319226/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 11, 135°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box  
Order No.
1843190000  
Type
LP 5.08/11/135 3.2SN OR BX  
GTIN (EAN)
4032248354757  
Qty.
50  adet
Product data
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12  
Packaging
Box  

Dimensions and weights

Depth
17,5  mm
Depth (inches)
0,689  inch
Height
20  mm
Height (inches)
0,787  inch
Height of lowest version
16,8  mm
Width
56,48  mm
Width (inches)
2,224  inch
Net weight
14,89  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE Signal - series LP  
Wire connection method
Clamping yoke connection  
Mounting onto the PCB
THT solder connection  
Conductor outlet direction
135°  
Pitch in mm (P)
5,08  mm
Pitch in inches (P)
0,2  "
Number of poles
11  
Pin series quantity
1  
Fitted by customer
Yes  
Number of rows
1  
Max. adjacent poles per row
24  
Solder pin length (l)
3,2  mm
Solder pin dimensions
0.75 x 0.9 mm  
Solder eyelet hole diameter (D)
1,3  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
Number of solder pins per pole
1  
Screwdriver blade
0.6 x 3.5  
Screwdriver blade standard
DIN 5264  
Tightening torque, min.
0,5  Nm
Tightening torque, max.
0,6  Nm
Clamping screw
M 3  
Stripping length
6  mm
L1 in mm
50,8  mm
L1 in inches
2  "
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch  
Protection degree
IP20  
Volume resistance
1.20 mΩ  

Material data

Insulating material
PA  
Colour
orange  
Colour chart (similar)
RAL 2000  
Insulating material group
I  
Comparative Tracking Index (CTI)
≥ 600  
UL 94 flammability rating
V-2  
Contact material
Cu-alloy  
Contact surface
tinned  
Coating
1-3 μm Ni  
4-6 μm SN  
Tinning type
matt  
Layer structure of solder connection
4...6 µm Ni / 4...6 µm Sn  
Storage temperature, min.
-40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
100  °C
Temperature range, installation, min.
-25  °C
Temperature range, installation, max.
100  °C

Conductors suitable for connection

Clamping range, min.
0,13  mm²
Clamping range, max.
6  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 12  
Solid, min. H05(07) V-U
0,5  mm²
Solid, max. H05(07) V-U
6  mm²
Flexible, min. H05(07) V-K
0,5  mm²
Flexible, max. H05(07) V-K
4  mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,5  mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5  mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm  
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409500000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282600000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409600000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0282700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        8 mm
    • Recommended wire-end ferrule:
      0409700000
    • Stripping length:
      • nominal:
        6 mm
    • Recommended wire-end ferrule:
      0372600000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.  
The outside diameter of the plastic collar should not be larger than the pitch (P)  

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
32  A
Rated current, max. number of poles (Tu=20°C)
30,5  A
Rated current, min. number of poles (Tu=40°C)
32  A
Rated current, max. number of poles (Tu=40°C)
25  A
Rated voltage for surge voltage class / pollution degree II/2
500  V
Rated voltage for surge voltage class / pollution degree III/2
250  V
Rated voltage for surge voltage class / pollution degree III/3
250  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4  kV
Short-time withstand current resistance
3 x 1s with 120 A  

Rated data acc. to CSA

Institute (CSA)
CSA  
Certificate No. (CSA)
200039-1202191  
Rated voltage (Use group B / CSA)
300  V
Rated voltage (Use group D / CSA)
300  V
Rated current (Use group B / CSA)
20  A
Rated current (Use group D / CSA)
10  A
Wire cross-section, AWG, min.
AWG 26  
Wire cross-section, AWG, max.
AWG 12  
Reference to approval values
Specifications are maximum values, details - see approval certificate.  

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300  V
Rated voltage (Use group D / UL 1059)
300  V
Rated current (Use group B / UL 1059)
20  A
Rated current (Use group D / UL 1059)
10  A
Wire cross-section, AWG, min.
AWG 26  
Wire cross-section, AWG, max.
AWG 12  

Packing

Packaging
Box  
VPE length
228  mm
VPE width
137  mm
VPE height
46  mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01