LXXX 15.00/07/90FR 4.5SN BK BX
Product image
LXXX 15.00/07/90FR 4.5SN BK BX
Product image
LXXX 15.00/07/90FR 4.5SN BK BX
Dimensional drawing
LXXX 15.00/07/90FR 4.5SN BK BX
Graph
LXXX 15.00/07/90FR 4.5SN BK BX
Graph
LXXX 15.00/07/90FR 4.5SN BK BX
Graph
Increased power reserves
Optimised application safety
LXXX 15.00/07/90FR 4.5SN BK BX
Product benefits
Increased power reserves
Optimised application safety
LXXX 15.00/07/90FR 4.5SN BK BX

LXXX 15.00/07/90FR 4.5SN BK BX

Printed circuit board terminals, 15.00 mm, Number of poles: 7, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box

Item No. 1386670000
Download data sheet Engineering Support Product Downloads
Related products 20
General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications Approvals

General ordering data

Version
Printed circuit board terminals, 15.00 mm, Number of poles: 7, 90°, Solder pin length (l): 4.5 mm, tinned, black, Clamping yoke connection, Clamping range, max. : 50 mm², Box  
Order No.
1386670000  
Type
LXXX 15.00/07/90FR 4.5SN BK BX  
GTIN (EAN)
4050118186789  
Qty.
10  items
Product data
IEC: 1000 V / 150 A / 0.5 - 50 mm²
UL: 600 V / 126 A / AWG 20 - AWG 1  
Packaging
Box  

Dimensions and weights

Depth
31  mm
Depth (inches)
1.22  inch
Height
56  mm
Height (inches)
2.205  inch
Height of lowest version
51.5  mm
Width
120.5  mm
Width (inches)
4.744  inch
Net weight
208.045  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System parameters

Product family
OMNIMATE Power - series LXXX  
Wire connection method
Clamping yoke connection  
Mounting onto the PCB
THT solder connection  
Conductor outlet direction
90°  
Pitch in mm (P)
15  mm
Pitch in inches (P)
0.591  "
Number of poles
7  
Pin series quantity
1  
Fitted by customer
No  
Number of rows
1  
Solder pin length (l)
4.5  mm
Solder pin dimensions
1.2 x 1.2 mm  
Solder eyelet hole diameter (D)
1.6  mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm  
Number of solder pins per pole
4  
Screwdriver blade
1.2 x 6.5  
Screwdriver blade standard
DIN 5264  
Tightening torque, min.
2.5  Nm
Tightening torque, max.
4  Nm
Clamping screw
M 6  
Stripping length
18  mm
L1 in mm
90  mm
L1 in inches
3.545  "
Touch-safe protection acc. to DIN VDE 0470
IP 20  
Protection degree
IP20  

Material data

Insulating material
Wemid (PA)  
Colour
black  
Colour chart (similar)
RAL 9011  
Insulating material group
I  
Comparative Tracking Index (CTI)
≥ 600  
UL 94 flammability rating
V-0  
Contact material
Cu-alloy  
Contact surface
tinned  
Coating
4-6 μm SN  
Layer structure of solder connection
1.5...3 µm Ni / 4...6 µm Sn matt  
Storage temperature, min.
-40  °C
Storage temperature, max.
70  °C
Operating temperature, min.
-50  °C
Operating temperature, max.
120  °C
Temperature range, installation, min.
-25  °C
Temperature range, installation, max.
120  °C

Conductors suitable for connection

Clamping range, min.
0.5  mm²
Clamping range, max.
50  mm²
Wire connection cross section AWG, min.
AWG 20  
Wire connection cross section AWG, max.
AWG 1  
Solid, min. H05(07) V-U
0.5  mm²
Solid, max. H05(07) V-U
16  mm²
Stranded, min. H07V-R
6  mm²
Stranded, max. H07V-R
50  mm²
Flexible, min. H05(07) V-K
0.5  mm²
Flexible, max. H05(07) V-K
35  mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.5  mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
35  mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0.5  mm²
w. wire end ferrule, DIN 46228 pt 1, max.
35  mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019180000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004090000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      9019210000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004110000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565700000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004130000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      10 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0565800000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0379300000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      16 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        21 mm
    • Recommended wire-end ferrule:
      0566000000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0375200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        20 mm
    • Recommended wire-end ferrule:
      0565600000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004070000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        19 mm
    • Recommended wire-end ferrule:
      9019320000
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      0368900000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      50 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        18 mm
    • Recommended wire-end ferrule:
      9004210000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage.  
The outside diameter of the plastic collar should not be larger than the pitch (P)  

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1  
IEC 61984  
Rated current, min. number of poles (Tu=20°C)
150  A
Rated current, min. number of poles (Tu=40°C)
150  A
Rated voltage for surge voltage class / pollution degree II/2
1,000  V
Rated voltage for surge voltage class / pollution degree III/2
1,000  V
Rated voltage for surge voltage class / pollution degree III/3
1,000  V
Rated impulse voltage for surge voltage class/ pollution degree II/2
8  kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
8  kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
8  kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600  V
Rated voltage (Use group C / CSA)
600  V
Rated voltage (Use group D / CSA)
600  V
Rated current (Use group B / CSA)
127  A
Rated current (Use group C / CSA)
127  A
Rated current (Use group D / CSA)
5  A
Wire cross-section, AWG, min.
AWG 20  
Wire cross-section, AWG, max.
AWG 1  

Rated data acc. to UL 1059

Institute (UR)
UR  
Certificate No. (UR)
E60693  
Rated voltage (Use group B / UL 1059)
600  V
Rated voltage (Use group C / UL 1059)
600  V
Rated current (Use group B / UL 1059)
126  A
Rated current (Use group C / UL 1059)
126  A
Wire cross-section, AWG, min.
AWG 20  
Wire cross-section, AWG, max.
AWG 1  
Reference to approval values
Specifications are maximum values, details - see approval certificate.  

Packing

Packaging
Box  
VPE length
355  mm
VPE width
141  mm
VPE height
61  mm

Type tests

Test: Durability of markings
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, type of material, pitch, date clock, approval marking CSA, approval marking UL, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 16 mm²
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 1/19
    • Type of conductor and conductor cross-section:
      H07V-R50
    • Type of conductor and conductor cross-section:
      H07V-K35
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    2.0 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    8,6 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999 section 8.5 / 04.94
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 20/1
    • Type of conductor and conductor cross-section:
      AWG 20/19
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 10/1
  • Evaluation:
    passed
  • Requirement:
    ≥ 90N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 10 mm²
  • Evaluation:
    passed
  • Requirement:
    > 236 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 1/19
  • Evaluation:
    not checked
  • Requirement:
    > 190 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      flexible 35 mm²
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.  
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • IP 20 from 16 mm² to 50 mm²
  • The test point can only be used as potential-pickup point.
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 6.0
EC002643  
ETIM 7.0
EC002643  
ETIM 8.0
EC002643  
ETIM 9.0
EC002643  
ETIM 10.0
EC002643  
ECLASS 9.0
27-44-04-01  
ECLASS 9.1
27-44-04-01  
ECLASS 10.0
27-44-04-01  
ECLASS 11.0
27-46-01-01  
ECLASS 12.0
27-46-01-01  
ECLASS 13.0
27-46-01-01  
ECLASS 14.0
27-46-01-01  
ECLASS 15.0
27-46-01-01  

Approvals

Approvals
![UR](/picture/UR.gif)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate No. (UR)
E60693