ACT20M-AI-AO-E-S
Product image
ACT20M-AI-AO-E-S
Connection diagram
ACT20M-AI-AO-E-S
Dimensional drawing
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S

ACT20M-AI-AO-E-S

Analogue isolating amplifier, Configurable, without sensor supply, Input : I / U, Output : I / U

№ продукта 1176010000
Открыть в конфигураторе
Загрузить спецификации Engineering Support Software Support Product Downloads
Tilbehør 4 Anvendte produkter 4
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data EMC conformity and approvals Part description Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/0d1637a4-c7dd-4915-8bc8-4c9de8d8b393/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/cbf09862-97e9-475d-b71a-c6db1e3e9933/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E337701 

General ordering data

Version
Analogue isolating amplifier, Configurable, without sensor supply, Input : I / U, Output : I / U 
Order No.
1176010000 
Type
ACT20M-AI-AO-E-S 
GTIN (EAN)
4032248970094 
Qty.
1 items

Dimensions and weights

Depth
114,3 mm
Depth (inches)
4,5 inch
Height
112,5 mm
Height (inches)
4,429 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
83,5 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-25 °C...70 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 
MTBF
249 a

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
configurable 
0...20 mA 
4…20mA 
Input frequency
100 Hz 
Input resistance, current
70 Ω 
Input resistance, voltage
>500 kΩ 
Input voltage
configurable 
0(2)…10 V 
0(1)…5 V 
Number inputs
1 
Sensor
Voltage source 
Current source 
Voltage drop, current input
<1,5 V 

Output

Cut-off frequency (-3 dB)
100 Hz 
Load impedance current
≤ 600 Ω 
@ max 23mA 
load impedance voltage
≥ 10 kΩ 
Number of outputs
1 
Output current
configurable 
0...20 mA 
4...20 mA 
Output voltage, note
configurable 
0(2)...10 V 
0(1)...5 V 
Type
active 
connected control must be passive 

General data

Delivery state
  • Setting parameters:
    Input
  • Configuration:
    0...20 mA
  • Setting parameters:
    Output
  • Configuration:
    0...20 mA
Delivery state
Input: 0...20 mA // Output: 0...20 mA 
Höjdområde för drift
≤ 2000 m 
Power consumption, max.
0,8 W
Power consumption, typ.
0,56 W
Precisión
<0.2 % of measuring range 
Protection degree
IP20 
Réponse à un échelon
≤ 7 ms 
Supply voltage
24 V DC ±30 % at terminal or via CH20M rail bus 
Tartósín
TS 35 
Znamionowy pobór mocy
1,2 VA
Конфигурация
DIP switch 
온도 계수
≤ 0.015 % / °C 

Insulation coordination

EMC standards
EN 61326-1 
Galvanische Trennung
3-way isolator 
Insulation voltage
2.5 kVeff /1 min. 
Rated voltage
300 Veff 
Verschmutzungsgrad
2 
Überspannungskategorie
II 

Data for Ex applications (ATEX)

Installation location
Device installed in safe area, zone 2 

Connection data

Type of connection
Screw connection 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC standards
EN 61326-1 
Standards
IEC 61010-1 

Part description

Product description
The configurable DC isolating amplifier ACT20M-AI-AO-E-S isolates and converts analogue signals. An analogue input signal is linearly converted into an analogue output signal and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) by means of direct wiring or the Weidmüller rail bus. 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20 

Tender specification sheets

Long specification

Universal standard signal isolating amplifier
1-channel signal isolating amplifier in 6.1 mm width with external power supply,
for transmitting and isolating analogue DC current signals 0/4 to 20 mA and voltage signals
0/2 to 10 V // 0/1 to 5 V. Input and output signals can be configured with DIP switches.Add-on housing for TS35 rail mounting
Dimensions: L/W/H  114.3/ 6.1/ 112.5 mm
Screw connection / Nominal cross-section 2.5 mm2
Protection degree: IP 20 












Input                         0/4...20 mA
                                      0/2...10 V or 0/1...10 V

Isolation                       EN 61010-1, 3-way isolation up to 2.5 kV AC/DC of all circuits against each other
Test voltage                2.5 kV input against output against auxiliary power
Rated voltage                     300 V AC/DC at overvoltage category II and pollution degree 2
Approvals                 cULus, DNV, GL


Output                       0/4...20 mA
                                      0/2...10 V or 0/1...5 V
Load resistance             < 600 Ohm/ Strom/> 10 kOhm/ voltage
Transmission error       < 0,2 % v. E. 
Limit frequency              100 Hz
Auxiliary power                   24 VDC +/- 30 %
Power loss                approx. 0.8 W
Ambient
temperature range         0 °C...+70 °C



Type                                ACT20M-AI-AO-E-S

 
Short specification

Universal standard signal isolating amplifier
1-channel signal isolating amplifier in 6.1 mm width with external power supply,
for transmitting and isolating analogue DC current signals 0/4...20 mA and voltage signals
0/2...10V // 0/1...5 V. I/O signals are configured with DIP switches.