ACT20P-CI-VO-P-P
Product image
ACT20P-CI-VO-P-P
Connection diagram
ACT20P-CI-VO-P-P
Dimensioned drawing
ACT20P-CI-VO-P-P
Similar to illustration
ACT20P-CI-VO-P-P
ACT20P-CI-VO-P-P

ACT20P-CI-VO-P-P

Analogue isolating amplifier, Input : 0(4)-20 mA, Output : 0-10 V, Voltage supply also via CH20M rail bus, Signal converter/isolator

Product ID 2514640000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 2 Afzonderlijke onderdelen 1 Verwante producten 15
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Classifications

Approvals

Dopuszczenia
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_322323/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E469563 
Certificate no. (cULusEX)
E338066 

General ordering data

Versione
Analogue isolating amplifier, Input : 0(4)-20 mA, Output : 0-10 V, Voltage supply also via CH20M rail bus, Signal converter/isolator 
주문 번호
2514640000 
유형
ACT20P-CI-VO-P-P 
GTIN (EAN)
4050118535211 
Qty.
1 items

Dimensions and weights

Profondità
113,7 mm
Depth (inches)
4,476 inch
높이
127,1 mm
Height (inches)
5,004 inch
Larghezza
12,5 mm
Width (inches)
0,492 inch
Net weight
140 g

Temperatures

Temperatura magazynowania
-40 °C...85 °C 
Temperatura eksploatacyjna
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Probability of failure

SIL az IEC 61508 szerint
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Alimentazione sensori
> 17 V DC at 20 mA 
Bemenetek darabszáma
1 
Sensor
2-wire transmitter (without own power supply) 
3-wire sensor 
4- wire sensor (with own power supply) 
spadek napięcia
≤ 1 V 
입력 전류
0...20 mA 
4…20mA 

Output

Load impedance current
≤ 550 Ω 
load impedance voltage
≥ 600 kΩ 
Number of outputs
1 
Tensión de salida, observacione
0…10 V (if input: 0…20 mA) 
2…10 V (if input: 4…20 mA) 
Type
active 
connected control must be passive 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Current consumption
≤60 mA (24V power supply, 20mA output) 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 0,5 ms 
Supply voltage
20…30 V DC 
Temperature coefficient
80 ppm/K 

Insulation coordination

EMC-Normer
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
3-way isolator 
between input ⁄ output ⁄ supply 
Insulation voltage
2 kV inputs / outputs / power supply 
Pollution severity
2 
Surge voltage category
III 
Test voltage
0,3 kV
Импульсное перенапряжение, до
4 kV (1.2/50 µs) 

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T5 Gc 
Marking
II 3 G Ex ec IIC T5 Gc 

Connection data

Tipo di collegamento
PUSH IN 
Åtdragningsmoment, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The fixed DC repeater ACT20P-CI-VO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is converted linear and galvanic isolated into an analogue output voltage signal. The power supply is galvanically isolated from input and output (3-way isolation).

Features
  • The active or passive mA current signal inputs are completely electrically isolated.
  • Front LED indicates operation status.
  • 3-way galvanic isolation between input, output and power supply
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20