DRIKITP 24VAC 2CO LD
Product image
Similar to illustration
DRIKITP 24VAC 2CO LD
Wiring diagram
DRIKITP 24VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRIKITP 24VAC 2CO LD
Graph
Electrical service life
DRIKITP 24VAC 2CO LD
Graph
AC operational voltage range
DRIKITP 24VAC 2CO LD
Dimensional drawing
Relay in combination with base
DRIKITP 24VAC 2CO LD
Miscellaneous
Type codes

DRIKITP 24VAC 2CO LD

D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 5 A, PUSH IN, Test button available: No

ID výrobku 2576240000
Otevřít v konfigurátoru
Stáhnout datový list Engineering Support Product Downloads
Toebehoren 9 Afzonderlijke onderdelen 3 Verwante producten 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Agréments
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 24 V AC, Continuous current: 5 A, PUSH IN, Test button available: No 
Référence
2576240000 
Tipo
DRIKITP 24VAC 2CO LD 
GTIN (EAN)
4050118586008 
Qty.
10 items

Dimensions and weights

Profondeur
63 mm
Depth (inches)
2,48 inch
Magasság
102,1 mm
Height (inches)
4,02 inch
Szélesség
15,9 mm
Width (inches)
0,626 inch
Net weight
59,448 g

Temperatures

Temperatura di magazzinaggio
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

Status zgodności z dyrektywą RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24 V AC 
Rated current AC
50 mA 
Power rating
1.2 VA 
Coil resistance
240 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Insulation coordination

Napięcie znamionowe
250 V
Степень загрязнения
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Skyddsklass
IP20 
Выдерживаемое импульсное напряжение на соседних контактах
4.8 kV (1.2/50 µs) 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

Connection data

Wire connection method
PUSH IN 
Longitud de desaislado, conexión nominal
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01