DRIKITP115VAC 2CO LD/PB
Product image
Similar to illustration
DRIKITP115VAC 2CO LD/PB
Wiring diagram
DRIKITP115VAC 2CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKITP115VAC 2CO LD/PB
Graph
Electrical service life
DRIKITP115VAC 2CO LD/PB
Graph
AC operational voltage range
DRIKITP115VAC 2CO LD/PB
Dimensional drawing
Relay in combination with base
DRIKITP115VAC 2CO LD/PB
Miscellaneous
Type codes

DRIKITP115VAC 2CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes

ID výrobku 2576170000
Otevřít v konfigurátoru
Stáhnout datový list Engineering-support Produktdownloads
Tilbehør 9 Enkeltdele 3 Anvendte produkter 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 115 V AC, Continuous current: 5 A, PUSH IN, Test button available: Yes 
Order No.
2576170000 
Type
DRIKITP115VAC 2CO LD/PB 
GTIN (EAN)
4050118585933 
Qty.
10 Styk

Dimensions and weights

Depth
63 mm
Depth (inches)
2,48 inch
Height
102,1 mm
Height (inches)
4,02 inch
Width
15,9 mm
Width (inches)
0,626 inch
Nettovikt
60,228 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
115 V AC 
Rated current AC
9.3 mA 
Power rating
1.1 VA 
코일 저항
6200 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Задержка выключения
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Nosná lišta
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanische Schaltstellungsanzeige
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Rigidità dielettrica del contatto aperto
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Resistencia a sobretensión en contactos adyacentes
4.8 kV (1.2/50 µs) 
Stupeň krytí
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Tanúsítványszám (cURus) aljzat
E312083 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
Clamping range, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Wire cross-section, solid, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01