PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
产品图片
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
产品图片
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
Dimensional drawing
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
Graph
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
Graph
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
Graph
PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU
Graph

PCB端子LSF-SMT 3.50/10/135 3.5SN BK TU

Printed circuit board terminals, 3.50 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tube

Tuotteen tunnus 1885730000
Lataa tietosivu Tekninen tuki Tuotelataukset
Samankaltaiset tuotteet 68
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

认证
![](https://assets.dam.weidmueller.com/assets/api/7849a070-6e16-4866-9b5a-c610b7f622e5/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E60693 

General ordering data

版本
Printed circuit board terminals, 3.50 mm, Number of poles: 10, 135°, Solder pin length (l): 3.5 mm, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tube 
订货号
1885730000 
类型
LSF-SMT 3.50/10/135 3.5SN BK TU 
GTIN (EAN)
4032248490646 
Кол.
15 items
Product data
IEC: 320 V / 17.5 A / 0.2 - 1.5 mm²
UL: 300 V / 12 A / AWG 28 - AWG 14 
Packaging
Tube 

Dimensions and weights

深
12.7 mm
Depth (inches)
0.5 inch
高度
16.4 mm
Height (inches)
0.646 inch
Height of lowest version
8.5 mm
宽度
35.7 mm
Width (inches)
1.406 inch
净重
8.733 g

Temperatures

Continuous operating temp., max.
120 °C

Environmental Product Compliance

RoHS 合规状态
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

产品系列
OMNIMATE Signal - series LSF 
导线连接方式
PUSH IN with actuator 
安装在印刷线路板上
THT/THR solder connection 
导线出线方向
135° 
间距 P（单位：mm）
3.5 mm
间距 P（单位：inch）
0.138 "
回路数
10 
Pin series quantity
1 
由客户装配
No 
Number of rows
1 
焊脚长度 (l)
3.5 mm
焊针长度公差
+0.1 / -0.3 mm 
焊针规格
0.35 x 0.8 mm 
Solder pin dimensions = d tolerance
0 / -0.1 mm 
焊接孔直径 (D)
1.1 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Stripping length
8 mm
L1 in mm
31.5 mm
L1 in inches
1.24 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
1.60 mΩ 

Material data

绝缘材料
LCP GF 
颜色编码
black 
Colour of operational elements
white 
比色表 (相似)
RAL 9011 
Grupo de materiales aislantes
IIIa 
Comparative Tracking Index (CTI)
≥ 175 
Moisture Level (MSL)
1 
UL 94 flammability rating
V-0 
触点材料
Cu-alloy 
Struktura vrstev pájeného připojení
4...6 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-30 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

压接范围，最小
0.13 mm²
压接范围，最大
1.5 mm²
Wire connection cross section AWG, min.
AWG 28 
导线最大压接面积 AWG
AWG 14 
rigido, min. H05(07) V-U
0.2 mm²
Одножильный, макс. H05(07) V-U
1.5 mm²
Flexible, min. H05(07) V-K
0.2 mm²
souple, max. H05(07) V-K
1.5 mm²
最小压接面积 带预绝缘管状端头(DIN 46 228/4)
0.25 mm²
con term. tub. con aislamiento DIN 46 228/4,máx
0.75 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0.25 mm²
最大压接面积 带管状端头，符合DIN46 228/ 1
1.5 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.25 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025760000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0690700000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9021040000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Номинальный ток, мин. кол-во контактов (Tu = 20 °C)
17.5 A
Courant nominal, nombre de pôles max. (Tu = 20 °C)
16 A
额定电流，最小回路数 (Tu = 40°C)
17.5 A
Bemessungsstrom, max. Polzahl (Tu=40°C)
14 A
Névleges feszültség a II/2 túlfeszültség osztályhoz / szennyezés mértékéhez
320 V
Tension de choc nominale pour classe de surtension/Degré de pollution III/2
160 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
160 V
Tensión nominal con categoría de sobretensión/grado de polución II/2
2.5 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
2.5 kV
Bemessungsstoßspannung bei Überspannungsk./Verschmutzungsgrad III/3
2.5 kV
Short-time withstand current resistance
3 x 1s with 80 A 

Rated data acc. to CSA

机构
CSA 
CSA 认证号
200039-1664286 
额定电压 (使用组 B / CSA)
300 V
额定电压 (使用组 D / CSA)
300 V
额定电流 (使用组 B / CSA)
10 A
额定电流 (使用组 D / CSA)
10 A
导线最小压接面积，AWG,
AWG 28 
导线最大压接面积，AWG
AWG 14 
参见认证参数
Specifications are maximum values, details - see approval certificate. 

Rated data acc. to UL 1059

机构
CURUS 
cURus 证书号
E60693 
额定电压 (使用组 B / UL 1059)
300 V
额定电压 (使用组 D / UL 1059)
300 V
额定电流 (使用组 B / UL 1059)
12 A
额定电流 (使用组 D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 28 
导线最大压接面积，AWG
AWG 14 
参见认证参数
Specifications are maximum values, details - see approval certificate. 

Packing

包装
Tube 
VPE 长度
555 mm
VPE 宽度
21 mm
VPE 高度
17 mm
表面电阻
Rs = 109 - 1012 Ω 

Type tests

测试标识的耐久性
  • Standard:
    DIN EN 60512-1-1 / 01.03
  • Test:
    mark of origin, type identification, pitch, durability
  • Evaluation:
    available
  • Test:
    approval marking UL
  • Evaluation:
    on packaging label
测试 可夹紧 截面积
  • Standard:
    DIN EN 60999-1 section 7 and 9.1 / 12.00, DIN EN 60947-1 section 8.2.4.5.1 / 12.02
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.14 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.14 mm²
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
导体损坏和意外松动测试
  • Standard:
    DIN EN 60999-1 section 9.4 / 12.00
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 1.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 1.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed
拉出测试
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 24/19
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥40 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U1.5
    • Type of conductor and conductor cross-section:
      H07V-K1.5
    • Type of conductor and conductor cross-section:
      AWG 16/1
    • Type of conductor and conductor cross-section:
      AWG 16/19
  • Evaluation:
    passed

Important note

IPC 标准的符合性
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
备注
  • Additional push button colours on request
  • Operating force of slider max. 40 N
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01