PRO DCDC 120W 12V/24V 5A
PRO DCDC 120W 12V/24V 5A
PRO DCDC 120W 12V/24V 5A
PRO DCDC 120W 12V/24V 5A
PRO DCDC 120W 12V/24V 5A

PRO DCDC 120W 12V/24V 5A

DC/DC converter

Ürün No. 2869030000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 1 İlgili ürünler 10
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data EMC / shock / vibration Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Connection data (signal) Signalling Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80)  
ROHS
Conform  
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html)  
Certificate no. (cULus)
E470829  

General ordering data

Version
DC/DC converter  
Order No.
2869030000  
Type
PRO DCDC 120W 12V/24V 5A  
GTIN (EAN)
4064675620853  
Qty.
1  adet

Dimensions and weights

Depth
120  mm
Depth (inches)
4,724  inch
Height
130  mm
Height (inches)
5,118  inch
Width
32  mm
Width (inches)
1,26  inch
Net weight
640  g

Temperatures

Storage temperature
-45 °C...85 °C  
Operating temperature
-25 °C...70 °C  
Humidity at operating temperature
5 - 95% rel. humidity  
Start-up
≥ -40 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
832efd73-195b-4198-ad0c-1126d0bc238d  

Input

Connection system
Screw connection: pluggable  
Current consumption in relation to the input voltage
  • Voltage type:
    DC
  • Input voltage:
    12 V
  • Input current:
    11,8 A
DC input voltage range
9 ... 18 V DC  
Input fuse (internal)
40A T  
Input voltage, max.
18  V
Input voltage, min.
9  V
Inrush current
<4 A @ Nominal input voltage  
Rated input voltage
12 V DC  
Recommended back-up fuse
20 A (DI) / 16 A … 20 A (Char. B, C)  
Wire connection method
Screw connection  

Output

Capacitive load
unrestricted  
Connection system
Screw connection  
Continuous output current @ UNominal
5 A @ 60°C, 6.25 A @ 45°C, 3.75 A @ 70°C  
DCL - peak load reserve
  • Boost duration:
    15 ms
  • Multiple of the rated current:
    600 %
Mains failure bridge-over time
  • Mains failure bridge-over time, min.:
    10 ms
  • Input voltage type:
    DC
  • Input voltage:
    12 V
  • Output current:
    5 A
  • Output voltage:
    24 V
Nominal output current for Unom
5 A @ 60 °C  
Output power
120  W
Output voltage, max.
29,5  V
Output voltage, min.
22  V
Output voltage, note
(adjustable via potentiometer on front)  
Overload protection
Yes  
Parallel connection option
yes, max. 3  
Protection against inverse voltage
Yes  
Rated output voltage
24 V DC  
Residual ripple, breaking spikes
≤ 20 mVPP @full load  
Wire connection method
Screw connection  

General data

Adjacent
No  
Current limiting
150% Iout  
Degree of efficiency
> 86 %  
Mounting position, installation notice
On TS 35 mounting rail, 50 mm clearance above and below for free air supply.  
With a load ≥ 50 % of the rated current, keep at least 15 mm lateral spacing.  
The device should be mounted vertically. For other mounting directions, derating to 75% of the load must be considered.  
Protection against reverse voltages from the load
32 V DC  
Protection degree
IP20  
Short-circuit protection
Yes  
Surge voltage category
II  

EMC / shock / vibration

Noise emission in accordance with EN55032
Class B  
Shock resistance IEC 60068-2-27
30 g in all directions  
Vibration resistance IEC 60068-2-6
0.7 g  

Insulation coordination

Insulation voltage input / earth
2  kV
Insulation voltage output / earth
0,5  kV
Insulation voltage, input/output
4  kV
Pollution severity
2  
Protection class
III  
Surge voltage category
II  

Electrical safety (applied standards)

For use with electronic equipment
Acc. to EN50178 / VDE0160  
Protection against dangerous shock currents
Acc. to VDE0106-101  
Protective separation / protection against electrical shock
VDE0100-410 / acc. to DIN57100-410  
Safety transformers for switch-mode power supplies
According to EN 61558-2-16  

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
12  AWG
Conductor cross-section, AWG/kcmil , min.
30  AWG
Conductor cross-section, flexible , min.
0,2  mm²
Conductor cross-section, rigid , max.
4  mm²
Conductor cross-section, rigid , min.
0,2  mm²
Connection system
Screw connection: pluggable  
Number of terminals
2 (+,−)  
Screwdriver blade
0.6 x 3.5  
PH 1  
PZ 1  
Tightening torque, max.
0,5  Nm
Tightening torque, min.
0,4  Nm
Wire connection cross section, flexible (input), max.
4  mm²

Connection data (output)

Conductor cross-section, AWG/kcmil , max.
14  AWG
Conductor cross-section, AWG/kcmil , min.
24  AWG
Conductor cross-section, flexible , max.
2,5  mm²
Conductor cross-section, flexible , min.
0,2  mm²
Conductor cross-section, rigid , max.
2,5  mm²
Conductor cross-section, rigid , min.
0,2  mm²
Connection system
Screw connection  
Number of terminals
4 (++ / --)  
Screwdriver blade
0.6 x 3.5  
Tightening torque, max.
0,5  Nm
Tightening torque, min.
0,4  Nm

Connection data (signal)

Number of terminals
5  
Wire connection cross-section, flexible (signal), max.
1,5  mm²
Wire connection cross-section, flexible (signal), min.
0,2  mm²
Wire connection method
PUSH IN  
Wire cross-section, AWG/kcmil , max.
14  
Wire cross-section, AWG/kcmil , min.
28  mm²
Wire cross-section, solid , max.
1,5  mm²
Wire cross-section, solid , min.
0,2  mm²

Signalling

Contact load (NO contact)
max. 30 V DC / 0.5 A  
max. 50 V AC / 0.3 A  
Floating contact
Yes  
Transistor output, positive-switching
DC OK: 20 mA max., short-circuit-proof  
I > 90%: 20 mA max., short-circuit-proof  
Low UIN: 20 mA max., short-circuit-proof  

Classifications

ETIM 6.0
EC002540  
ETIM 7.0
EC002540  
ETIM 8.0
EC002540  
ETIM 9.0
EC002540  
ETIM 10.0
EC002540  
ECLASS 9.0
27-04-07-01  
ECLASS 9.1
27-04-07-01  
ECLASS 10.0
27-04-07-01  
ECLASS 11.0
27-04-07-01  
ECLASS 12.0
27-04-07-01  
ECLASS 13.0
27-04-90-02  
ECLASS 14.0
27-04-07-01  
ECLASS 15.0
27-04-07-01