S2L 3.50/04/90F 3.5SN OR BX
Product image
S2L 3.50/04/90F 3.5SN OR BX
Product image
S2L 3.50/04/90F 3.5SN OR BX
Dimensional drawing

S2L 3.50/04/90F 3.5SN OR BX

NYÁK dugaszoló csatlakozó, tűs érintkezősor, Peremes aljzat, THT-forrasztott csatlakozás, 3.50 mm, Pólusszám: 4, 90°, Forrasztótüske hossza (l): 3.5 mm, ónozott, narancssárga, Doboz

Nr. produktu 2941900000
Pobierz kartę katalogową Descargas de productos
Produkty pokrewne 33
Approvals Általános rendelési adatok Dimensions et poids Conformité environnementale du produit Caractéristiques du système Données des matériaux Rated data acc. to IEC Rated data acc. to CSA Jmenovité údaje podle UL 1059 Emballage Important note Classifications

Approvals

ROHS
Conform 

Általános rendelési adatok

Version
NYÁK dugaszoló csatlakozó, tűs érintkezősor, Peremes aljzat, THT-forrasztott csatlakozás, 3.50 mm, Pólusszám: 4, 90°, Forrasztótüske hossza (l): 3.5 mm, ónozott, narancssárga, Doboz 
Order No.
2941900000 
Type
S2L 3.50/04/90F 3.5SN OR BX 
GTIN (EAN)
4099986712201 
Product data
IEC: 160 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions et poids

Depth
14,2 mm
Depth (inches)
0,559 inch
Height
14 mm
Height (inches)
0,551 inch
Height of lowest version
10,5 mm
Width
14 mm
Width (inches)
0,551 inch
Net weight
1,766 g

Conformité environnementale du produit

RoHS Compliance Status
Megfelel, kivétel nélkül 
REACH SVHC
No SVHC above 0.1 wt% 

Caractéristiques du système

Produktfamilie
OMNIMATE Signal - série B2L/S2L 3.50 - 2 rangées 
Mounting onto the PCB
THT solder connection 
Pitch in mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
Outgoing elbow
90° 
Number of poles
4 
Počet pájených kolíků na pól
1 
Solder pin length (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Nombre de pôles
2 
Protezione da contatto accidentale DIN VDE 57 106
sicurezza per le dita a connettore non innestato/per il dorso della mano a connettore innestato 
DIN VDE 0470에 따른 터치 안전 보호
IP 20 gesteckt/ IP 10 ungesteckt 
Can be coded
Yes 
Plugging cycles
25 
Plugging force/pole, max.
5 N
Fuerza de extracción/polo, máx.
4 N
Couple de serrage
  • Forgatónyomaték típusa:
    Vite di montaggio, Circuito stampato
  • Informazioni sull'utilizzo:
    • 조임 토크:
      • min.:
        0,1 Nm
      • maks.:
        0,15 Nm
    • Рекомендуемый винт:
      • Artikelnummer:
        1610740000

Données des matériaux

Insulating material
PBT GF 
Colour
주황색 
Colour chart (similar)
RAL 2000 
Insulating material group
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
-40 °C
Temperatura magazynowania, max.
70 °C
-50 °C
Betriebstemperatur, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
10 A
Rated current, max. number of poles (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
Rated current, max. number of poles (Tu=40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
160 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Rated voltage for surge voltage class / pollution degree III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
1,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
1,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Rated current (Use group B / CSA)
5 A

Jmenovité údaje podle UL 1059

Nennspannung (Use group B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Emballage

Packaging
Boîte 
VPE length
352 mm
VPE width
139 mm
VPE height
26 mm

Important note

IPC conformity
Zgodność: produkty są projektowane, wytwarzane oraz dostarczane zgodnie z uznanymi normami międzynarodowymi, właściwości produktów są zgodne z gwarantowanymi w karcie katalogowej lub ich jakość wykonania jest zgodna z wymogami klasy 2 wg IPC-A-610. Na życzenie mogą być ocenione dalsze wymagania dotyczące produktów. 
Notes
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01