TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ

TS 35X7.5/5X18 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Ürün No. 1879090000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 20 İlgili ürünler 19
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Order No.
1879090000 
Type
TS 35X7.5/5X18 2M/ST/SZ 
GTIN (EAN)
4032248473786 
Qty.
40 

Dimensions and weights

Depth
7,5 mm
Depth (inches)
0,295 inch
Height
35 mm
Height (inches)
1,378 inch
Width
2.000 mm
Width (inches)
78,74 inch
Net weight
300,926 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Ancho de ranura
5,2 mm
Basic material
Steel 
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2.000 mm
  • max.:
    2.000 mm
Rail profilé pré-perforé
Yes 
Resistenza al cortocircuito conforme ai cavi E-Cu
16 mm²
Rés szélesség
  • min.:
    5 mm
  • nominal:
    5 mm
  • max.:
    5 mm
Schlitzabstand
7 mm
Short-time withstand current per second according to IEC 60947-7-2
1,92 kA
Slit length
18 mm
Slitslängd
  • min.:
    18 mm
  • nominal:
    18 mm
  • max.:
    18 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
25 mm
Standards
DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1 mm
Зазор между прорезями
  • min.:
    7 mm
  • nominal:
    7 mm
  • max.:
    7 mm
드릴 구멍 직경
5,2 mm

Important note

Product information
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02