WF 10 NFF
Product image
WF 10 NFF

WF 10 NFF

Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 120 mm², Threaded stud connection

Product ID 1968950000
Openen in configurator
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 17 Verwante producten 1078
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data System specifications Additional technical data Conductors for clamping (rated connection) Dimensions General Rating data Classifications

Approvals

Jóváhagyások
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Változat
Bolt-type screw terminals, Feed-through terminal, Rated cross-section: 120 mm², Threaded stud connection 
Rendelési szám
1968950000 
Típus
WF 10 NFF 
GTIN (EAN)
4032248702862 
Qty.
20 items

Dimensions and weights

Mélység
72,5 mm
Depth (inches)
2,854 inch
Magasság
67 mm
Height (inches)
2,638 inch
Szélesség
33,8 mm
Width (inches)
1,331 inch
Net weight
100,7 g

Temperatures

Tárolási hőmérséklet
-25 °C...55 °C 
Temperatura otoczenia
-5 °C…40 °C 
Continuous operating temp., min.
-50 °C
Continuous operating temp., max.
120 °C

Environmental Product Compliance

RoHS megfelelőségi állapot
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Material data

Basic material
Wemid 
Colour
dark beige 
UL 94 flammability rating
V-0 

System specifications

Version
Single-stud terminals 
End cover plate required
No 
Number of potentials
1 
Number of levels
1 
Number of clamping points per level
1 
Levels cross-connected internally
No 
PE connection
No 
Mounting rail
TS 35 

Additional technical data

Explosion-tested version
No 
Number of similar terminals
1 
Open sides
Open 
Type of mounting
Snap-on 

Conductors for clamping (rated connection)

120 mm²
2 x cable lugs DIN 46 234
6 to 120 mm² 
2 x cable lugs DIN 46 235
10...95 mm² 
Cable lug to DIN 46235
10...95 mm² 
Clamping range, min.
6 mm²
Connection cross-section, finely stranded, min.
6 mm²
Connection cross-section, stranded, max.
120 mm²
Connection cross-section, stranded, min.
6 mm²
Connection direction
on side 
Kabelskor DIN 46 234
6...120 mm² 
Number of connections
1 
Stud size for spade connection
M 10 
Tightening torque, max.
36 Nm
Tightening torque, min.
30 Nm
Type of connection
Threaded stud connection 
Wire connection cross section AWG, max.
kcmil 250 
Wire connection cross section AWG, min.
AWG 8 
Wire connection cross section, finely stranded, max.
120 mm²
Wire connection cross section, finely stranded, min.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min.
6 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
6 mm²
Wire connection cross-section, solid core, max.
120 mm²
Wire connection cross-section, solid core, min.
6 mm²

Dimensions

TS 35 offset
31,5 mm

General

Montageskena obestyckad
TS 35 
Normer
IEC 60947-7-1 
przekrój przyłączeniowy przewodu AWG, maks.
kcmil 250 
Поперечное сечение подключаемого провода AWG, мин.
AWG 8 

Rating data

Rated cross-section
120 mm²
Rated voltage
1 000 V
Rated DC voltage
1 000 V
Voltage with epoxy resin partition plate
2 300 V
Nominal current
269 A
Current at maximum wires
269 A
Standards
IEC 60947-7-1 
Volume resistance according to IEC 60947-7-x
0,12 mΩ
Rated impulse withstand voltage
8 kV 
Impulse voltage with epoxy resin partition plate
12 kV
Power loss in accordance with IEC 60947-7-x
8,61 W
Pollution severity
3 

Classifications

ETIM 8.0
EC000897 
ETIM 9.0
EC000897 
ETIM 10.0
EC000897 
ECLASS 14.0
27-25-01-01 
ECLASS 15.0
27-25-01-01