ZB 35K GE/GN M6X16
Product image

ZB 35K GE/GN M6X16

Clamping yoke (bus-bar), Clamping yoke, Green/yellow, 35 mm², Width: 14 mm, M 6, Steel

Ürün No. 0502660000
Veri sayfasını indir Engineering Support Product Downloads
aksesuarıdır 7 İlgili ürünler 25
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Material data Rating data IECEx/ATEX System specifications Additional technical data Conductors for clamping (rated connection) Dimensions General Rating data Product images Classifications Approvals

General ordering data

Version
Clamping yoke (bus-bar), Clamping yoke, Green/yellow, 35 mm², Width: 14 mm, M 6, Steel  
Order No.
0502660000  
Type
ZB 35K GE/GN M6X16  
GTIN (EAN)
4008190052294  
Qty.
20  adet

Dimensions and weights

Depth
34  mm
Depth (inches)
1,339  inch
Height
32  mm
Height (inches)
1,26  inch
Width
14  mm
Width (inches)
0,551  inch
Net weight
18,58  g

Temperatures

Ambient temperature
-5 °C…40 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

Material data

Material
Steel  
Insulating material
PA  
Colour
Green/yellow  

Rating data IECEx/ATEX

Marking EN 60079-7
Ex eb II C Gb  
Ex 2014/34/EU label
II 2 G D  
Safety notice
Installation instructions:
The potential equalisation (PE) rail modules are suitable for use in housings in atmospheres with flammable gases and dust. For use in areas with flammable gases, these housings must meet the requirements of EN 60079-0 and EN 60079-7. For use in areas with flammable dust, these housings must meet the requirements of EN 60079-0 and EN 60079-31.

When combined with other terminal block ranges and sizes, and when other accessories are used, you must comply with the clearance and creepage distances given.

Regarding accessory use, the manufacturer's instructions must be followed.

List of restrictions:
The PE rail modules are considered one component, with Ex marking when used with the busbar holders of type SH and WEW. When used independently, the above named components are not covered by this certificate.  

System specifications

Version
for busbar 10 x 3 mm  

Additional technical data

Installation advice
Feed-through (bushing)  
Type of mounting
when screwed in  

Conductors for clamping (rated connection)

Clamping range, max.
35  mm²
Clamping range, min.
16  mm²
Clamping screw
M 6  
Stripping length
19  mm
Tightening torque, max.
5  Nm
Tightening torque, min.
2,5  Nm
Type of connection
Clamping yoke  
Wire connection cross section, finely stranded, max.
35  mm²
Wire connection cross section, finely stranded, min.
16  mm²
Wire connection cross-section, solid core, max.
16  mm²
Wire connection cross-section, solid core, min.
16  mm²

Dimensions

TS 35 offset
39  mm

General

Installation advice
Feed-through (bushing)  

Rating data

Rated cross-section
35  mm²

Product images

Classifications

ETIM 6.0
EC002848  
ETIM 7.0
EC002848  
ETIM 8.0
EC002848  
ETIM 9.0
EC002848  
ETIM 10.0
EC002848  
ECLASS 9.0
27-14-11-92  
ECLASS 9.1
27-14-11-92  
ECLASS 10.0
27-14-11-92  
ECLASS 11.0
27-14-11-46  
ECLASS 12.0
27-14-11-46  
ECLASS 13.0
27-25-01-16  
ECLASS 14.0
27-25-01-16  
ECLASS 15.0
27-25-01-16  

Approvals

ROHS
Conform