LLFS 7.50/10/90V 5.0SN BK BX
Product image
LLFS 7.50/10/90V 5.0SN BK BX
Product image
LLFS 7.50/10/90V 5.0SN BK BX
Dimensional drawing
LLFS 7.50/10/90V 5.0SN BK BX
Derating curve
LLFS 7.50/10/90V 5.0SN BK BX
Derating curve
LLFS 7.50/10/90V 5.0SN BK BX
Product benefits
Power up to UL 600 V
Offset solder pins
LLFS 7.50/10/90V 5.0SN BK BX
Product benefits
Tool-free wiring
Top contact security

LLFS 7.50/10/90V 5.0SN BK BX

Printed circuit board terminals, 7.50 mm, Number of poles: 10, 90°, Solder pin length (l): 5 mm, tinned, black, PUSH IN without actuator, Clamping range, max. : 6 mm², Box

항목 번호 2473080000
데이터 시트 다운로드 Engineering Support Product Downloads
액세서리 2 관련 제품 12
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E60693 

General ordering data

Version
Printed circuit board terminals, 7.50 mm, Number of poles: 10, 90°, Solder pin length (l): 5 mm, tinned, black, PUSH IN without actuator, Clamping range, max. : 6 mm², Box 
Order No.
2473080000 
Type
LLFS 7.50/10/90V 5.0SN BK BX 
GTIN (EAN)
4050118658194 
Ilość
20 Styk
Product data
IEC: 1000 V / 41 A / 0.5 - 6 mm²
UL: 600 V / 37 A / AWG 24 - AWG 8 
Packaging
Box 

Dimensions and weights

Depth
20.05 mm
Głębokość (cale)
0.789 inch
Height
30.56 mm
Height (inches)
1.203 inch
Height of lowest version
25.56 mm
Width
76 mm
Szerokość (cale)
2.992 inch
Net weight
42.2 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Power - series LL 
Wire connection method
PUSH IN without actuator 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
90° 
Pitch in mm (P)
7.5 mm
Pitch in inches (P)
0.295 "
Number of poles
10 
liczba rzędów z biegunami
1 
고객 맞춤
No 
Number of rows
1 
Solder pin length (l)
5 mm
Solder pin dimensions
d = 1.5 mm 
Solder eyelet hole diameter (D)
2 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
liczba kołków lutowanych na biegun
1 
Stripping length
12 mm
L1 in mm
67.5 mm
L1 in inches
2.655 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Insulation resistance
≥ 108 Ω 

Material data

Materiał izolacyjny
Wemid (PA) 
Barwny
black 
Tabela kolorów (podobny)
RAL 9011 
grupa materiałów izolacyjnych
I 
Opór izolacji
≥ 108 Ω 
Klasa palności wg UL 94
V-0 
Materiał styków
Cu-alloy 
Powierzchnia styku
tinned 
Struktura warstwowa przyłącza lutowanego
4...10 µ Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Provozní teplota, min.
-40 °C
Betriebstemperatur, max.
120 °C

Conductors suitable for connection

Zakres zaciskania, min.
0.25 mm²
6 mm²
jednodrutowe, min. H05(07) V-U
0.5 mm²
jednodrutowe, maks. H05(07) V-U
6 mm²
cienkodrutowe, min. H05(07) V-K
0.5 mm²
cienkodrutowe, maks. H05(07) V-K
6 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
z AEH z kołnierzem DIN 46 228/4, maks.
6 mm²
z tulejką zaciskową, DIN 46228 pt 1, min.
0.25 mm²
z końcówką kablową wg DIN 46 228/1, maks.
6 mm²
Zaciskany przewód
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      1076980000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9025930000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        15 mm
    • Recommended wire-end ferrule:
      9019140000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9004060000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0.75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9025910000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      2.5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019170000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0186100000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      4 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0244100000
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      9019200000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      6 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        14 mm
    • Recommended wire-end ferrule:
      0533500000
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      0191900000
Reference text
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
In accordance with IEC 60947-7-1 
Prąd znamionowy, min. liczba biegunów (Tu=20°C)
41 A
Prąd znamionowy, maks. liczba biegunów (Tu=20°C)
34 A
Prąd znamionowy, min. liczba biegunów (Tu=40°C)
37 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
29 A
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia II/2
1,000 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/2
1,000 V
napięcie znamionowe przy kat. przepięć/stopniu zanieczyszczenia III/3
1,000 V
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia II/2
8 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/2
8 kV
znamionowe napięcie udarowe przy kat. przepięć/stopniu zanieczyszczenia III/3
8 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
600 V
Rated voltage (Use group C / CSA)
600 V
Rated voltage (Use group D / CSA)
600 V
Rated current (Use group B / CSA)
37 A
Rated current (Use group C / CSA)
37 A
Rated current (Use group D / CSA)
5 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 8 

Rated data acc. to UL 1059

Institute (cURus)
CURUS 
Certificate No. (cURus)
E60693 
Rated voltage (Use group B / UL 1059)
600 V
Rated voltage (Use group C / UL 1059)
600 V
Napięcie znamionowe (grupa użytkowa D / UL 1059)
600 V
Rated current (Use group B / UL 1059)
37 A
Prąd znamionowy (grupa użytkowa C / UL 1059)
37 A
Prąd znamionowy (grupa użytkowa D / UL 1059)
5 A
przekrój przyłącza przewodu AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 8 
Hinweis zu den Zulassungswerten
Angaben sind Maximalwerte, Details siehe Zulassungs-Zertifikat. 

Packing

Packaging
Box 
VPE length
215 mm
VPE width
210 mm
VPE height
40 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 60947-7-4 section 7.1.4 / 08.13
  • Test:
    mark of origin, type identification, type of material, pitch, durability, stripping length
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.5 mm²
    • Type of conductor and conductor cross-section:
      solid 6 mm²
    • Type of conductor and conductor cross-section:
      stranded 6 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/19
    • Type of conductor and conductor cross-section:
      AWG 24/1
    • Type of conductor and conductor cross-section:
      AWG 10/1
    • Type of conductor and conductor cross-section:
      AWG 10/19
    • Type of conductor and conductor cross-section:
      H07V-K10
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99, IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    0,4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K1
    • Type of conductor and conductor cross-section:
      H07V-U1
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      H07V-U2.5
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      H07V-U4.0
  • Evaluation:
    passed
  • Requirement:
    1.4 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K6
    • Type of conductor and conductor cross-section:
      H07V-U6
  • Evaluation:
    passed
Pull-out test
  • Standard:
    DIN EN 60999-1 section 9.5 / 12.00
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-K0.5
    • Type of conductor and conductor cross-section:
      H05V-U0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      H07V-U2.5
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K4
    • Type of conductor and conductor cross-section:
      H07V-U4.0
  • Evaluation:
    passed
  • Requirement:
    ≥80 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K6
    • Type of conductor and conductor cross-section:
      H07V-U6
  • Evaluation:
    passed
  • Requirement:
    ≥35 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-K1
    • Type of conductor and conductor cross-section:
      H07V-U1
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required clearances and creepage distances should be observed in the application
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01