RCMKITP-I 115VAC 4CO LD
Product image
Similar to illustration
RCMKITP-I 115VAC 4CO LD
Wiring diagram
RCMKITP-I 115VAC 4CO LD
Graph
DC load limit curve
Resistive load
RCMKITP-I 115VAC 4CO LD
Graph
Derating curve
Relay in combination with base
RCMKITP-I 115VAC 4CO LD
Graph
AC operational voltage range
RCMKITP-I 115VAC 4CO LD
Graph
Electrical service life
250 V AC resistive load
RCMKITP-I 115VAC 4CO LD
Dimensional drawing
RCMKITP-I 115VAC 4CO LD
Miscellaneous
RCMKITP-I 115VAC 4CO LD
Miscellaneous
RCMKITP-I 115VAC 4CO LD
Miscellaneous
RCMKITP-I 115VAC 4CO LD

RCMKITP-I 115VAC 4CO LD

Tämä tuote ei ole pian enää saatavana.

Available until: 31.12.2025

RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 6 A, PUSH IN, Test button available: Yes

Tuotteen tunnus 8921140000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 19 Yksittäiset osat 4 Samankaltaiset tuotteet 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
ROHS
Megfelel 

General ordering data

Version
RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 6 A, PUSH IN, Test button available: Yes 
Order No.
8921140000 
Type
RCMKITP-I 115VAC 4CO LD 
GTIN (EAN)
4032248692354 
Qty.
10 items
Delivery status
This article will no longer be available in the future. 
Available until
31.12.2025 

Dimensions and weights

Depth
78,3 mm
Depth (inches)
3,083 inch
Height
98 mm
Výška (v palcích)
3,858 inch
Width
28 mm
Width (inches)
1,102 inch
순중량
107,5 g

Temperatures

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…70 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Nincs 0,1 tömeg% feletti SVHC 

Control side

Rated control voltage
115 V AC 
Rated current AC
10.5 mA 
Jmenovité výkonové údaje
1.36 VA 
Tekercsellenállása
4845 Ω ± 12 % 
Status indicator
red LED 

Load side

Rated switching voltage
240 V AC 
Continuous current
6 A 
max. Kopplingsfrekvens vid märklast
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
1 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
Špičkový proud
12 A / 20 ms 
AC switching capacity (resistive), max.
1500 VA 
DC switching capacity (resistive), max.
144 W @ 24 V 
켜기 지연
≤ 15 ms 
끄기 지연
≤ 10 ms 
Contact type
4 CO contact (AgNi) 
Mechanical service life
AC coil 20 x 106 switching cycles 
DC coil 30 x 106 switching cycles 

General data

Mounting rail
TS 35 
Prüftaste vorhanden
Oui 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
black 

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Группа изоляционного материала
IIIa 
Clearance and creepage distances for control side - load side
≥ 4 mm 
제어 측면 - 부하 측면에 대한 절연 강도
2.5 kVeff / 1 Min. 
Rigidità dielettrica dei contatti adiacenti
2 kVeff / 1 min 
Rigidité diélectrique des contacts ouverts
1.2 kVeff /1 min. 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Номер сертификата (CSA), реле
249409-2426937 
Certificate no. (CSA) base
249409-2295474 
Certificate No. (DNV)
TAA000011A 
Certificate no. (cURus) relay
E522350 
Núm. de certificación (cURus) base
E223759 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
12 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,75 mm²
1,5 mm²
Wire cross-section, solid, min.
0,75 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, max. (AWG)
AWG 16 
Wire connection cross section, finely stranded, min.
0,75 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire cross-section, finely stranded, max. (AWG)
AWG 16 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,75 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,75 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01