S2L 3.50/46/180F 3.5SN OR BX
Product image
S2L 3.50/46/180F 3.5SN OR BX
Product image
S2L 3.50/46/180F 3.5SN OR BX
Dimensional drawing

S2L 3.50/46/180F 3.5SN OR BX

PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 46, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box

Item No. 2559360000
Download data sheet Engineering Support Product Downloads
Accessories 3 Related products 39
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Wersja
PCB plug-in connector, male header, Flange, THT solder connection, 3.50 mm, Number of poles: 46, 180°, Solder pin length (l): 3.5 mm, tinned, orange, Box 
Nr zam.
2559360000 
Typ
S2L 3.50/46/180F 3.5SN OR BX 
GTIN (EAN)
4050118669107 
Qty.
18 items
Product data
IEC: 250 V / 10 A
UL: 150 V / 10 A 
Packaging
Box 

Dimensions and weights

Głębokość
10,5 mm
Depth (inches)
0,413 inch
Wysokość
17,7 mm
Height (inches)
0,697 inch
Height of lowest version
14,2 mm
Szerokość
87,5 mm
Width (inches)
3,445 inch
Net weight
11,424 g

Environmental Product Compliance

Состояние соответствия RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Famille de produits
OMNIMATE Signal - series B2L/S2L 3.50 - 2-row 
Type of connection
Board connection 
montaż na płytce drukowanej
THT solder connection 
Raster w mm (P)
3,5 mm
Pitch in inches (P)
0,138 "
kąt odejścia
180° 
Number of poles
46 
Number of solder pins per pole
1 
Lötstiftlänge (l)
3,5 mm
Solder pin dimensions
d = 1.0 mm 
Octagonal 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
77 mm
L1 in inches
3,034 "
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Can be coded
Yes 
Plugging force/pole, max.
5 N
Pulling force/pole, max.
4 N
Tightening torque
  • Torque type:
    Mounting screw, PCB
  • Usage information:
    • Tightening torque:
      • min.:
        0,1 Nm
      • max.:
        0,15 Nm
    • Recommended screw:
      • Part number:
        1610740000

Material data

Insulating material
PBT 
Colour
orange 
Colour chart (similar)
RAL 2000 
绝缘材料组
IIIa 
Comparative Tracking Index (CTI)
≥ 200 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Layer structure of solder connection
2...3 µm Ni / 5...7 µm Sn glossy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-30 °C
Temperature range, installation, max.
100 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
10 A
Rated current, max. number of poles (Tu=20°C)
10 A
Rated current, min. number of poles (Tu=40°C)
9 A
额定电流，最大回路数 (Tu = 40°C)
8,5 A
Rated voltage for surge voltage class / pollution degree II/2
250 V
Rated voltage for surge voltage class / pollution degree III/2
125 V
Rated voltage for surge voltage class / pollution degree III/3
80 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
2,5 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
2,5 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 77 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
150 V
Prąd znamionowy (grupa użytkowa B / CSA)
5 A

Rated data acc. to UL 1059

Nennspannung (Use group B / UL 1059)
150 V
Rated current (Use group B / UL 1059)
10 A

Packing

opakowanie
Box 
Długość VPE
338 mm
VPE width
130 mm
Wysokość VPE
27 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Hänvisningstext
  • Additional variants on request
  • Gold-plated contact surfaces on request
  • Spacing between rows: see hole layout
  • Rated current related to rated cross-section & min. No. of poles.
  • Diameter of solder eyelet D = 1.3+0.1 mm
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • For additional mechanical support for male connectors with screw flange (…F), we recommend an additional cable gland with fastening screws (sheet metal screw ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C – see Accessories). Cable gland only permitted before soldering.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01