TRPL 48-110VDC 1CO AU TRAK
Similar to illustration
TRPL 48-110VDC 1CO AU TRAK
Similar to illustration
TRPL 48-110VDC 1CO AU TRAK
Wiring diagram
TRPL 48-110VDC 1CO AU TRAK
Graph
DC load limit curve
Resistive load
TRPL 48-110VDC 1CO AU TRAK
Dimensional drawing
TRPL 48-110VDC 1CO AU TRAK
Miscellaneous
Type codes

TRPL 48-110VDC 1CO AU TRAK

TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No

Ürün No. 2774000000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 27 İlgili ürünler 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Homologaciones
![](https://mdcop.weidmueller.com.cn/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 

General ordering data

Versión
TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No 
Código
2774000000 
Tipo
TRPL 48-110VDC 1CO AU TRAK 
GTIN (EAN)
4064675037774 
Qty.
10 adet

Dimensions and weights

Profundidad
62,5 mm
Depth (inches)
2,461 inch
Altura
89,4 mm
Height (inches)
3,52 inch
Width
6,4 mm
Width (inches)
0,252 inch
Net weight
25 g

Temperatures

Temperatura de almacenamiento
-40 °C...85 °C 
Temperatura ambiente
-40 °C…70 °C 
Humidity
95 % for 30 days, minimal condensation to EN 50155 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
Exención RoHS (si procede/conocida)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
75e5f661-708e-44b0-9fc2-4f6c675b3b71 

Control side

Rated control voltage
48 V…110 V DC +25 % / -30 % 
Rated current DC
2.4 mA @ 48 V DC 
3.2 mA @ 110 V DC 
Power rating
115 mW @ 48 V DC 
352 mW @ 110 V DC 
Coil resistance
10600 Ω ± 15 % 
Status indicator
Green LED 
Protective circuit
Suppressor diode 
Free-wheeling diode 

Load side

Rated switching voltage
250 V AC 
Continuous current
6 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
50 mW 
Inrush current
20 A / 20 ms 
AC switching capacity (resistive), max.
1500 VA 
Switch-on delay
<11 ms 
Switch-off delay
<30 ms 
Contact type
1 CO contact (Au (Gold), AgSnO2) 
Mechanical service life
10 x 106 switching cycles 

General data

Operating altitude
≤ 2000 m 
above sea level 
Version
for railway applications 
Укомплектованная монтажная рейка
TS 35 
Test button available
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    V-0
  • Component:
    Pusher
  • UL94 flammability rating:
    V-0

Insulation coordination

Tensione nominale
300 V
오염 심각도
2 
서지 전압 범주
III 
Clearance and creepage distances for control side - load side
≥ 6 mm 
Dielectric strength for control side - load side
4 kVeff / 1 Min. 
Type of isolation at input and output
reinforced insulation 
Dielectric strength of open contact
1 kVeff / 1 min 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
6 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Técnica de conexión de conductores
PUSH IN 
Longitud de desaislado, conexión nominal
9 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,14 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26 
Wire cross-section, solid, max. (AWG)
AWG 14 
Wire connection cross section, finely stranded, min.
0,35 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26 
Wire cross-section, finely stranded, max. (AWG)
AWG 14 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01