Properties
| Version | Surge voltage arrester, Low voltage, Accessories, Surge protection II |
| Order No. | 1351320000 |
| Type | VPU II 0 PV 600V DC |
| GTIN (EAN) | 4050118158755 |
| Qty. | 1 items |
| Depth | 64 mm |
| Depth (inches) | 2.52 inch |
| Height | 52 mm |
| Height (inches) | 2.047 inch |
| Width | 17.8 mm |
| Width (inches) | 0.701 inch |
| Net weight | 90 g |
| Storage temperature | -40 °C...80 °C |
| Operating temperature | -40 °C... |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Colour | orange |
| Design |
Installation housing; 1TE
Insta IP 20 |
| Optical function display | green = OK; red = arrester is defective - replace |
| Protection degree | IP20 |
| Rail | TS 35 |
| UL 94 flammability rating | V-0 |
| Version | Surge protection II |
| Pollution severity | 2 |
| Surge voltage category | III |
| Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE | 600 V |
| Protection level Up (+/- , -/PE , +/PE) | ≤ 2.2 kV |
| Protection level Up at IN (per module) | ≤ 2.2 kV |
| PV system voltage, max. Ucpv | 600 V |
| Requirements class | Type II |
| Short-circuit curent ISCPV | 200 A |
| Standards | EN 50539-11 |
| Discharge current Imax (8/20µs) wire-PE | 40 kA |
| Discharge current In (8/20µs) wire-PE | 20 kA |
| Leakage current at Un | 30 µA |
| Max. continuous voltage, Uc (DC) | 600 V |
| Number of poles | 1 |
| Protection level Up at IN (L/N-PE) | ≤ 2.2 kV |
| PV voltage, acc. to IEC 60364-7-712 | <600 V |
| Rated voltage (DC) | 600 V |
| Response time | ≤ 25 ns |
| Standards | EN 50539-11 |
| Voltage type | DC |
| Type of connection | pluggable |
| Voltage type | DC |
| Number of poles | 1 |
| Protection degree | IP20 |
| Colour | orange |
| Approval/Certificate/Document of Conformity | [EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86295) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1351320000) |
| User Documentation | [Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35333) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC000941 |
| ETIM 7.0 | EC000941 |
| ETIM 8.0 | EC000941 |
| ETIM 9.0 | EC000941 |
| ECLASS 9.0 | 27-13-08-05 |
| ECLASS 9.1 | 27-13-08-05 |
| ECLASS 10.0 | 27-13-08-05 |
| ECLASS 11.0 | 27-13-08-05 |
| ECLASS 12.0 | 27-17-90-90 |
| ECLASS 13.0 | 27-17-90-90 |
| ECLASS 14.0 | 27-17-90-90 |
| Long specification | Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 600 VDC series The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 600 VDC for PV systems Type: Weidmüller VPU II 0 PV 600 VDC Order No.: 1351320000 |
| Short specification | Spare arrester for surge voltage arrester VPU II 600 V DC series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 600 V DC for PV systems Type: Weidmüller VPU II 0 PV 600 V DC Order no.: 1351320000 |
| Approvals |  |
| ROHS | Conform |