Skip to content Skip to navigation menu

Download data sheet Related products

VSSC6TRGDT110VAC/DC10KA

Surge protection for instrumentation and control, Surge protection for measurement and control, U_P(L/N-PE) ≤ 1200 V

Item No. 1064890000

Properties

General ordering data

Version	Surge protection for instrumentation and control, Surge protection for measurement and control, U_P(L/N-PE) ≤ 1200 V
Order No.	1064890000
Type	VSSC6TRGDT110VAC/DC10KA
GTIN (EAN)	4032248830145
Qty.	10 items

Dimensions and weights

Depth	81 mm
Depth (inches)	3.189 inch
Height	88.5 mm
Height (inches)	3.484 inch
Width	6.2 mm
Width (inches)	0.244 inch
Net weight	43.6 g

Temperatures

Storage temperature	-40 °C...80 °C
Operating temperature	-40 °C...80
Humidity	5...96 %

Probability of failure

SIL in compliance with IEC 61508	3
MTTF	11,416 a
SFF	100 %
λges	10
PFH in 1*10^-9 per hour	0

Environmental Product Compliance

RoHS Compliance Status	Compliant without exemption
REACH SVHC	No SVHC above 0.1 wt%

Rated data UL

UL certificate

[UL Zertifikat](PDF/E311081VOL1SEC3.pdf)

CSA protection data

Gas group C	IIB
Gas group D	IIA
Gas groups A, B	IIC
Input current, max. I_I	12 A
Input voltage, max. U_i	195 V
Internal capacity, max. C_I	0 nF
Internal inductance, max. L_I	0 µH

General data

Colour	black
Design	Terminal
Isolating function	Yes
Optical function display	No
Protection degree	IP20
Rail	TS 35
Segment	Measurement - Monitoring - Setting
Testing option	Functional screw with test plug receptacle, connections 1, 2, 4, 5
UL 94 flammability rating	V-0
Version	Surge protection for measurement and control

Insulation coordination acc. to EN 50178

Pollution severity	2
Surge voltage category	III

Rated data IEC / EN

Capacitance	4.2 nF
Discharge current I_max (8/20µs) wire-PE	10 kA
Discharge current I_n (8/20µs) wire-PE	2.5 kA
Discharge current, max. (8/20 µs)	20 kA
Lightning test current I_imp (10/350 µs)	1 kA
Lightning test current, I_imp (10/350 µs) Wire-PE	1 kA
Max. continuous voltage, Uc (AC)	138 V
Max. continuous voltage, Uc (DC)	195 V
Number of poles	1
Overload - failure mode	Modus 2
Protection level U_P (typ.)	≤ 1200 V
Rated current I_N	12 A
Rated voltage (AC)	110 V
Rated voltage (DC)	156 V
Requirements category acc. to IEC 61643-21	C2 C3 D1
Standards	IEC 61643-21
Surge current-carrying capacity C2	2.5 kA 8/20 µs 5 kV 1.2/50 µs
Surge current-carrying capacity C3	50 A 10/1000 μs
Surge current-carrying capacity D1	1 kA 10/350 μs
Voltage type	AC/DC
Volume resistance	<0.1 Ω

Further details of approvals

GOST certificate

[GOST-Zertifikat](PDF/7950_n1-n4.pdf)

Connection data

Stripping length	10 mm
Type of connection	Screw connection
Tightening torque, min.	0.5 Nm
Tightening torque, max.	0.8 Nm
Clamping range, min.	0.5 mm²
Clamping range, max.	4 mm²
Wire cross-section, solid, min.	0.5 mm²
Wire cross-section, solid, max.	6 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.	0.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.	4 mm²
Connection cross-section, stranded, min.	0.5 mm²
Connection cross-section, stranded, max.	4 mm²

Electrical data

Voltage type

AC/DC

General data

Number of poles	1
Protection degree	IP20
Colour	black

Ratings IECEx/ATEX/cUL

cUL certificate

[cUL Certificate](pdf/VSSC.PDF)

Important note

Product information

Mode 2: State where the voltage-limiting part of the SPD was short-circuited due to a very low impedance within the SPD. The line is inoperable, but the measuring equipment is still protected by means of a short-circuit.

Downloads

Approval/Certificate/Document of Conformity	[SIL Paper](https://mdcop.weidmueller.com/mediadelivery/asset/900_35329) [EU_Konformitätserklärung / EU_Declaration_of_Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_86289)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_60165)
Eplan Data Portal	[Eplan data](https://dataportal.eplan.com/part-details/WEI.1064890000)
CADENAS eCATALOG	[CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1064890000)
User Documentation	[Beipackzettel / Instruction sheet](https://mdcop.weidmueller.com/mediadelivery/asset/900_35338)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)

Classifications

ETIM 6.0	EC000943
ETIM 7.0	EC000943
ETIM 8.0	EC000943
ETIM 9.0	EC000943
ECLASS 9.0	27-13-08-07
ECLASS 9.1	27-13-08-07
ECLASS 10.0	27-13-08-07
ECLASS 11.0	27-13-08-07
ECLASS 12.0	27-17-90-90
ECLASS 13.0	27-17-90-90
ECLASS 14.0	27-17-90-90

Tender specification sheets

Long specification

Feed-through terminal, 12.4mm wide with sparkover gap between the two signal lines and the mounting rail potential, TS 35 contact base.Each signal path can be opened using an isolator.A signal with max. 12A can be protected here. When the terminal is fitted, a simultaneous electrically conducting contact is made between the mounting rail (earth) and the reference potential (ground) of the protection circuit in the terminal. Optical identification of the terminal based on the type of protected switching and the voltage level. The terminal can be labelled or marked.

Short specification

Feed-through terminal with sparkover gaps (GDT) between two signal lines and mounting rail potential.Each signal path can be opened using an isolator. TS 35 contact base. Version: 110 V UC 10kA

Approvals